0. INTRODUCTION
1. SCOPE
   1. Functional definition
   2. Field of application
   3. Principles
2. REFERENCES
3. TERMS AND DEFINITIONS
4. MESSAGE DEFINITION
   1. Data segment clarification
   2. Data segment index (alphabetical sequence)
   3. Message structure
      1. Segment table
5. Annex

This specification provides the definition of the Instruction contract status message (IFTMCS) to be used in Electronic Data Interchange (EDI) between trading partners, involved in administration, commerce and transport.

This paper provides the definition of the Instruction Contract Status Message to be used in fulfilling the requirements of trading partners in the transport chain worldwide, in the interchange of cargo and transport related information using Electronic Data Interchange (EDI).

This message is a single consignment based message, being aligned with other single consignment based messages such as the booking messages (IFTMBP, IFTMBF and IFTMBC), the Instruction Message (IFTMIN) and the Arrival Notice Message (IFTMAN). The single consignment based messages can be used by all modes of transport for the forwarding and transport of goods from any origin to any destination, regardless of route or prevailing commercial practice. These messages are suitable for the arrangement of the transport of goods between all parties to the movement of the consignment (including the consignor/shipper and consignee as well as the forwarders, brokers, and carriers involved) as well as providing the information necessary to perform that transport and delivery of the goods.

They should be used in the same way by each mode of transport when the requirements are common even if functionally similar information is known by different names.

A message from the party providing the transport/forwarding services to the party that issued the instructions for those services stating the actual details, terms and conditions (charges when applicable) of the service and of the consignment involved. In addition it can be used for the exchange of contract information between carriers mutually.

This message may be applied for both national and international trade. It is based on universal practice and is not dependent on the type of business or industry.

The party providing the transport services will send an instruction contract status message, usually after receipt of the instruction message. The message can replace the actual contractual document such as for instance a Waybill, under those circumstances where there are no legal or other restrictions.

The message might contain information concerning charges but should not be seen as a replacement for the invoice.

• A consignment may contain several goods items.
• Goods items may or may not be containerized.
• A goods item may be transported in one or more containers, and a single container may contain one or more goods items.
• One goods item may be related to one or more customs tariff codes.
• Goods items related to one customs tariff code may be carried in one or more containers.
• Goods items may reflect either the contractual or operational description of the goods.
• Pre-carriage (advanced haulage) and/or on-carriage (destination haulage) of goods items or equipment within one booking or instruction may take place in different steps, each step specified with its own transport details group.
• Equipment may have other types of equipment attached to it, e.g. a temperature control unit attached to a container.
• Equipment and/or goods items may be attached to or transported on another load or transport device, which as such may be attached to or transported on yet another load or transport device, e.g. a container on a chassis on a rail-car.
• Transport devices, which have the ability of powered movement on their own, are specified in the transport details group. Other load or transport devices are specified as equipment.
• The expression of packaging for goods items can be expressed at up to three levels.

A number of generic transport terms are used in this specification, to be described as:

• MODE OF TRANSPORT: The method of transport used for the conveyance of goods or persons, e.g. by rail, by road, by sea.
• MEANS OF TRANSPORT: The vehicle used for the transport of goods or persons, e.g. aircraft, truck, vessel.
• TYPE OF MEANS OF TRANSPORT: The type of vehicle used in the transport process, e.g. wide body, tank truck, passenger vessel.
• EQUIPMENT: Material resources necessary to facilitate the transport and handling of cargo. Transport equipment does under the given circumstances not have the ability to move by its own propulsion (e.g. sea container, trailer, unit load device, pallet).
• TYPE OF EQUIPMENT: The type of material used, e.g. 40 feet container, four way pallet, mafi trailer.

See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 1.

See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 2.

This section should be read in conjunction with the Branching Diagram and the Segment Table which indicate mandatory, conditional and repeating requirements.

0010 UNH, Message header

A service segment starting and uniquely identifying a message. The message type code for the Instruction contract status message is IFTMCS.

Note: Instruction contract status messages conforming to this document must contain the following data in segment UNH, composite S009:

0020 BGM, Beginning of message

A segment to indicate the beginning of a message and to transmit identifying number and type of the message.

0030 CTA, Contact information

A segment to identify a person or department to whom communication should be directed.

0040 COM, Communication contact

A segment to identify a communication number of a person or department to whom communication should be directed.

0050 DTM, Date/time/period

A segment to indicate a date and time applying to the whole message, e.g., date and time of document issue.

0060 TSR, Transport service requirements

A segment to identify the contract, conditions of carriage, services, and priority requirements for the transport.

0070 CUX, Currencies

A segment to indicate default currencies and exchange rates.

0080 MOA, Monetary amount

A segment to indicate a monetary value for entire consignment, e.g. insured value, invoice amount, disbursements, etc.

0090 FTX, Free text

A segment to specify free form or processable supplementary information, such as status of transport, remarks to be printed on the transport documents (where required), consignment remarks, insurance instructions, etc., or any other additional information.

0100 CNT, Control total

A segment to specify totals for a consignment.

0110 Segment Group 1: LOC-DTM

A group of segments to specify locations and related date(s)/time(s) which apply to the entire message, e.g. place of transshipment.

0120 LOC, Place/location identification

A segment to identify a location applying to the entire message.

0130 DTM, Date/time/period

A segment to indicate date(s) and time(s) relating to the location.

0140 Segment Group 2: TOD-LOC

A group of segments to specify terms of delivery and related locations.

0150 TOD, Terms of delivery

A segment to specify the applicable terms of delivery.

0160 LOC, Place/location identification

A segment to specify a location related to the terms of delivery.

0170 Segment Group 3: RFF-DTM

A group of segments containing a reference and constants which apply to the entire message.

0180 RFF, Reference

A segment to express a reference which applies to the entire message such as: the document/message number that is to be updated by this very message (according to data element 1225 Message Function, Coded in segment BGM), booking reference, order number, insurance contract, etc.

0190 DTM, Date/time/period

A segment to indicate date and time relating to the reference.

0200 Segment Group 4: GOR-DTM-LOC-SEL-FTX-SG5

A group of segments to identify customs and other governmental procedures and required documents.

0210 GOR, Governmental requirements

A segment to indicate applicable governmental procedures related to import, export and transport of the goods.

0220 + DTM, Date/time/period

A segment to indicate date and time related to documents and/or Customs- and/or governmental procedures for the consignment (e.g. date of issuing of Customs document, expiration date of Customs document, etc.).

0230 + LOC, Place/location identification

A segment to specify locations associated with Customs-and/or governmental procedures for the consignment (e.g. Customs office of exit, Customs office of destination, etc.).

0240 + SEL, Seal number

A segment to identify seals and seal issuer associated with the Customs procedure and/or Customs document for the consignment.

0250 FTX, Free text

A segment to provide additional governmental requirements information.

0260 Segment Group 5: DOC-DTM

A group of segments to specify required documents by government.

0270 DOC, Document/message details

A segment to indicate a document required by government.

0280 DTM, Date/time/period

A segment to specify the date/time related to the required document.

0290 Segment Group 6: CPI-CUX-LOC-MOA

A group of segments to indicate charge methodology which applies to the entire message.

0300 CPI, Charge payment instructions

A segment to indicate default charge methodology.

0310 CUX, Currencies

A segment to specify the payment currency related to the charge methodology.

0320 LOC, Place/location identification

A segment to identify the place of charge collection.

0330 MOA, Monetary amount

A segment to identify the monetary amount associated with the charges.

0340 Segment Group 7: TCC-LOC-FTX-CUX-PRI-EQN-PCD-MOA-QTY

A group of segments to specify charge calculations associated with the transport.

0350 TCC, Transport charge/rate calculations

A segment to specify charge.

0360 LOC, Place/location identification

A segment to indicate a location.

0370 FTX, Free text

A segment to specify processable supplementary information associated with charge.

0380 CUX, Currencies

A segment to specify currencies associated with charge.

0390 PRI, Price details

A segment to specify price details such as price (e.g. 100 dollars) and unit price basis (e.g. per 1000 kilograms).

0400 EQN, Number of units

A segment to specify the number of units to which the unit price basis applies.

0410 PCD, Percentage details

A segment to indicate the applicable reduction or surcharge percentage details.

0420 MOA, Monetary amount

A segment to specify a monetary amount, such as prepaid amount, discount or total amount.

0430 QTY, Quantity

A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight.

0440 Segment Group 8: TDT-DTM-TSR-LOC-SG9

A group of segments to indicate details of the movement of goods such as mode and means of transport, locations, departure, and arrival date(s) and time(s).

0450 TDT, Details of transport

A segment to indicate information related to a certain stage of the transport, such as mode, means and carrier.

0460 DTM, Date/time/period

A segment to indicate departure/arrival date and time.

0470 TSR, Transport service requirements

A segment to identify contract, conditions of carriage, services, priority requirements for this stage of transport.

0480 LOC, Place/location identification

A segment to indicate a location such as origin, destination, stop off, etc. related to this leg of transport.

0490 Segment Group 9: RFF-DTM

A group of segments to specify an additional reference related to the stage of the transport.

0500 RFF, Reference

A segment to specify the additional reference.

0510 DTM, Date/time/period

A segment to identify date and time relating to the reference.

0520 Segment Group 10: NAD-LOC-MOA-SG11-SG12-SG13-SG14-SG15

A group of segments to identify a party, related references, locations contacts, required documents, and charges to be paid by the party.

0530 NAD, Name and address

A segment to identify the party's name, address, and function.

0540 LOC, Place/location identification

A segment to indicate location where a specific function will be performed.

0550 MOA, Monetary amount

A segment to identify the monetary amount associated with the party.

0560 Segment Group 11: CTA-COM

A group of segments identifying a contact and its communications related to the party.

0570 CTA, Contact information

A segment to identify a person or department within a party.

0580 COM, Communication contact

A segment to identify a communication number of a person or department to whom communication should be directed.

0590 Segment Group 12: DOC-DTM

A group of segments to identify required documents.

0600 DOC, Document/message details

A segment to identify a document required of, by or for the party.

0610 DTM, Date/time/period

A segment to identify date and time relating to the reference.

0620 Segment Group 13: TCC-PRI-EQN-PCD-MOA-QTY

A group of segments to specify charges associated with the party.

0630 TCC, Transport charge/rate calculations

A segment to specify charges associated with the party.

0640 PRI, Price details

A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilogram).

0650 EQN, Number of units

A segment to specify the number of units to which the unit price basis applies.

0660 PCD, Percentage details

A segment to indicate the applicable reduction or surcharge percentage details.

0670 MOA, Monetary amount

A segment to specify a monetary amount, such as prepaid amount, discount or total amount.

0680 QTY, Quantity

A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight.

0690 Segment Group 14: RFF-DTM

A group of segments to specify a reference related to the party.

0700 RFF, Reference

A segment to identify a reference used by a party.

0710 DTM, Date/time/period

A segment to indicate date and time relating to the reference.

0720 Segment Group 15: CPI-CUX-LOC-MOA

A group of segments to identify the charge and its amount to be paid by the party.

0730 CPI, Charge payment instructions

A segment to identify default charge methodology.

0740 CUX, Currencies

A segment to indicate payment currency related to the charge methodology.

0750 LOC, Place/location identification

A segment to identify the place of charge collection.

0760 MOA, Monetary amount

A segment to identify the monetary amount associated with the charges.

0770 Segment Group 16: GID-HAN-TMP-RNG-TMD-LOC-MOA-PIA-FTX-SG17-

GDS-SG18-SG19-SG20-SG21-SG22-SG23-SG25-SG27-SG28 A group of segments to describe the goods items for which transport is undertaken.

0780 GID, Goods item details

A segment to identify a goods item for which transport is undertaken. A goods item can be identified by up to three levels of packaging.

0790 HAN, Handling instructions

A segment to specify handling instructions relating to the goods item.

0800 TMP, Temperature

A segment to specify a temperature setting for a goods item.

0810 RNG, Range details

A segment to specify a temperature range setting for a goods item.

0820 TMD, Transport movement details

A segment to specify transport movement details for a goods item.

0830 LOC, Place/location identification

A segment to specify a country associated with a goods item, such as country of origin, or country of destination.

0840 MOA, Monetary amount

A segment to specify a monetary amount associated with a goods item, such as declared value, FOB value, etc.

0850 PIA, Additional product id

A segment to specify article numbers.

0860 FTX, Free text

A segment to specify processable supplementary information relating to the goods item.

0870 Segment Group 17: NAD-DTM

A group of segments to identify different places of collection and/or delivery for the goods item.

0880 NAD, Name and address

A segment to specify an address of a place of collection or delivery for a goods item.

0890 DTM, Date/time/period

A segment to indicate date and time relating to the place of collection or delivery.

0900 Segment Group 18: GDS-FTX

A group of segments to describe the goods item.

0910 * GDS, Nature of cargo

A segment to describe the nature of cargo.

0920 - FTX, Free text

A segment to describe the goods item.

0930 Segment Group 18: MEA-EQN

A group of segments to specify measurements applicable to a goods item.

0940 MEA, Measurements

A segment to specify measurements, other than dimensions, applicable to a goods item.

0950 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

0960 Segment Group 19: DIM-EQN

A group of segments to specify dimensions applicable to a goods item.

0970 DIM, Dimensions

To specify dimensions applicable to a goods item.

0980 EQN, Number of units

A segment to specify the number of equipment units to each of which the given dimension applies.

0990 Segment Group 20: RFF-DTM

A group of segments to identify references to a goods item.

1000 RFF, Reference

A segment to identify a reference to a goods item.

1010 DTM, Date/time/period

A segment to indicate date and time relating to the reference.

1020 Segment Group 21: PCI-RFF-DTM

A group of segments to specify marks and numbers of a goods item.

1030 PCI, Package identification

A segment to specify marks and numbers of a good item.

1040 RFF, Reference

A segment to identify a reference relating to the marks and numbers.

1050 DTM, Date/time/period

A segment to identify date and time of the reference.

1060 Segment Group 22: DOC-DTM

A group of segments to specify documents and associated date(s) and time(s) for a goods item.

1070 DOC, Document/message details

A segment to specify a document prepared for a goods item.

1080 DTM, Date/time/period

A segment to associate date and time with the prepared document.

1090 Segment Group 23: TPL-SG24

A group of segments to identify transport details and associated measurements for a goods item. This group may be repeated to indicate the different phases of the movement.

1100 TPL, Transport placement

A segment to identify transport details for a goods item.

1110 Segment Group 24: MEA-EQN

A group of segments to identify measurements.

1120 MEA, Measurements

A segment to specify the distribution of a goods item among the transport details.

1130 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

1140 Segment Group 25: SGP-SG26

A group of segments to specify the distribution of a goods item among the transport equipment.

1150 SGP, Split goods placement

A segment to identify the equipment in which goods are transported.

1160 Segment Group 26: MEA-EQN

A group of segments to identify measurements.

1170 MEA, Measurements

A segment to specify measurements of that portion of the goods item in the equipment.

1180 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

1190 Segment Group 27: TCC-PRI-EQN-PCD-MOA-QTY-LOC

A group of segments to specify charge associated with the goods item.

1200 TCC, Transport charge/rate calculations

A segment to specify charge associated with the goods item.

1210 PRI, Price details

A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilogram).

1220 EQN, Number of units

A segment to specify the number of units to which the unit price basis applies.

1230 PCD, Percentage details

A segment to indicate the applicable reduction or surcharge percentage details.

1240 MOA, Monetary amount

A segment to specify a monetary amount, such as prepaid amount, discount or total amount.

1250 QTY, Quantity

A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight.

1260 LOC, Place/location identification

A segment to indicate location where a specific function will be performed.

1270 Segment Group 28: DGS-FTX-SG29-SG30-SG31

A group of segments to specify dangerous goods details related to the goods item. One goods item may be in different dangerous goods classes.

1280 DGS, Dangerous goods

A segment to indicate the class of dangerous goods, packing group, etc.

1290 FTX, Free text

A segment to specify the dangerous goods technical name and to specify any additional dangerous goods information.

1300 Segment Group 29: CTA-COM

A group of segments to identify a contact to whom communication regarding the dangerous goods can be directed.

1310 CTA, Contact information

A segment to identify a person or department.

1320 COM, Communication contact

A segment to identify a communication number of a person or department.

1330 Segment Group 30: MEA-EQN

A group of segments to identify dangerous goods measurements.

1340 MEA, Measurements

A segment to specify measurements of the dangerous goods.

1350 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

1360 Segment Group 31: SGP-SG32

A group of segments to specify the distribution of the dangerous goods among the transport equipment.

1370 SGP, Split goods placement

A segment to identify the equipment in which the dangerous goods are transported.

1380 Segment Group 32: MEA-EQN

A group of segments to identify dangerous goods measurements.

1390 MEA, Measurements

A segment to specify measurements of that portion of the dangerous goods in the equipment.

1400 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

1410 Segment Group 33: EQD-EQN-TMD-MEA-DIM-SEL-TPL-HAN-TMP-FTX-

SG34-SG35-SG36 A group of segments to specify equipment in which goods are transported.

1420 EQD, Equipment details

A segment to specify equipment, and equipment size and type used in the transport.

1430 EQN, Number of units

A segment to specify number of pieces of equipment required.

1440 TMD, Transport movement details

A segment to specify transport movement details for the equipment.

1450 MEA, Measurements

A segment to specify measurements, other than dimensions, associated with the equipment, such as weight.

1460 DIM, Dimensions

A segment to specify dimensions applicable to equipment.

1470 SEL, Seal number

A segment to identify seal and seal issuer associated with the equipment.

1480 TPL, Transport placement

A segment to identify transport details for the equipment.

1490 HAN, Handling instructions

A segment to specify handling instructions for specified equipment.

1500 TMP, Temperature

A segment to specify a temperature setting for the equipment.

1510 FTX, Free text

A segment to specify processable supplementary information associated with the equipment.

1520 Segment Group 34: TCC-PRI-EQN-PCD-MOA-QTY

A group of segments to specify charges associated with the equipment.

1530 TCC, Transport charge/rate calculations

A segment to specify a charge associated with the equipment.

1540 PRI, Price details

A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilogram).

1550 EQN, Number of units

A segment to specify the number of units to which the unit price basis applies.

1560 PCD, Percentage details

A segment to indicate the applicable reduction or surcharge percentage details.

1570 MOA, Monetary amount

A segment to specify a monetary amount, such as prepaid amount, discount or total amount.

1580 QTY, Quantity

A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight.

1590 Segment Group 35: NAD-DTM

A group of segments to identify different equipment pick-up or drop-off places.

1600 NAD, Name and address

A segment to specify a pick-up or drop-off address.

1610 DTM, Date/time/period

A segment to indicate date and time relating to pick-up or drop-off.

1620 Segment Group 36: EQA-EQN

A group of segments to specify the attached equipment and related number of pieces.

1630 EQA, Attached equipment

A segment to identify attached or related equipment such as a chassis attached to a container.

1640 EQN, Number of units

A segment to specify number of pieces of equipment required.

1650 UNT, Message trailer

A service segment ending a message, giving the total number of segments in the message and the control reference number of the message.

	BGM	Beginning of message
	CNT	Control total
	COM	Communication contact
	CPI	Charge payment instructions
	CTA	Contact information
	CUX	Currencies
	DGS	Dangerous goods
	DIM	Dimensions
	DOC	Document/message details
	DTM	Date/time/period
	EQA	Attached equipment
	EQD	Equipment details
	EQN	Number of units
	FTX	Free text
	GDS	Nature of cargo
	GID	Goods item details
	GOR	Governmental requirements
	HAN	Handling instructions
	LOC	Place/location identification
	MEA	Measurements
	MOA	Monetary amount
	NAD	Name and address
	PCD	Percentage details
	PCI	Package identification
	PIA	Additional product id
	PRI	Price details
	QTY	Quantity
	RFF	Reference
	RNG	Range details
	SEL	Seal number
	SGP	Split goods placement
	TCC	Transport charge/rate calculations
	TDT	Details of transport
	TMD	Transport movement details
	TMP	Temperature
	TOD	Terms of delivery
	TPL	Transport placement
	TSR	Transport service requirements
	UNH	Message header
	UNT	Message trailer

1. TDT+20+HL12345+1:MARITIME+:CONTAINER VESSEL+:::HAPAG

LLOYD+++PHXXX:::FAITHFUL'

Notes: 20 indicates 'main transport' (d.e. 8051);

HL12345 is assigned by the carrier (d.e. 8028; is the 'flight number' in the air mode); PHXXX is the radio call sign (d.e. 8213); 'FAITHFUL' is the name of the vessel

2. TDT+20+91/05/0021+3:ROAD++:::INT. TRUCKING CO.+++BB- 10-XX::::NL' Note: BB-10-XX represents the (Dutch) truck

registration no.

Change indicators
plus sign		An addition.
asterisk		Addition/substraction/change to a code entry for a particular data element.
hash or pound sign		Changes to names.
vertical bar		Changes to text for descriptions, notes and functions.
minus sign		A deletion.
letter X		Marked for deletion.