Frames | No Frames

Return to EDIFACT D95A Messages page.
UN/EDIFACT
DRAFT RECOMMENDATION

Instruction contract status message

This message is available for formal trial for at least six months from the date of approval by UN/ECE/TRADE/WP.4.

Organisations are invited to trial this message. Comments on the results from the trial should be forwarded to their Rapporteur's Team Secretariat as soon as they are available. Based on the results of the trials, a UNSM may be issued.

The segments, composite data elements, data elements and codes for use in the trial of this message are contained in the Draft directory. However, this information may differ from that in the Standard directory (UNTDID), even for material having the same identifying tags.


Message Type:IFTMCS
Version:D
Release:95A
Contr. Agency:UN
Status:2
Revision:3
Date:95-01-06
SOURCE:Western European EDIFACT Board

CONTENTS
Instruction contract status message
  1. INTRODUCTION
  2. SCOPE
    1. Functional definition
    2. Field of application
    3. Principles
  3. REFERENCES
  4. TERMS AND DEFINITIONS
  5. MESSAGE DEFINITION
    1. Data segment clarification
    2. Data segment index (alphabetical sequence)
    3. Message structure
      1. Segment table
  6. ANNEX

For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.6, UN/ECE UNSM General Introduction


This message also occurs in the following versions of this standard:
D93A, D94A, D94B, D95A, D95B, D96A, D96B, D97A, D97B, D98A, D98B, D99A, D99B, D00A, D00B, D01A, D01B, D01C, D02A, D02B, D03A, D03B, D04A, D04B

0. INTRODUCTION

This specification provides the definition of the Instruction contract status message (IFTMCS) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport.


1. SCOPE

This paper provides the definition of the Instruction Contract Status Message to be used in fulfilling the requirements of trading partners in the transport chain worldwide, in the interchange of cargo and transport related information using Electronic Data Interchange (EDI).

This message is a single consignment based message, being aligned with other single consignment based messages such as the booking messages (IFTMBP, IFTMBF and IFTMBC), the Instruction Message (IFTMIN) and the Arrival Notice Message (IFTMAN). The single consignment based messages can be used by all modes of transport for the forwarding and transport of goods from any origin to any destination, regardless of route or prevailing commercial practice. These messages are suitable for the arrangement of the transport of goods between all parties to the movement of the consignment (including the consignor/shipper and consignee as well as the forwarders, brokers, and carriers involved) as well as providing the information necessary to perform that transport and delivery of the goods.

They should be used in the same way by each mode of transport when the requirements are common even if functionally similar information is known by different names.


1.1. Functional Definition

A message from the party providing the transport/forwarding services to the party that issued the instructions for those services stating the actual details, terms and conditions (charges when applicable) of the service and of the consignment involved. In addition it can be used for the exchange of contract information between carriers mutually.


1.2. Field of Application

This message may be applied for both national and international trade. It is based on universal practice and is not dependent on the type of business or industry.


1.3. Principles

The party providing the transport services will send an instruction contract status message, usually after receipt of the instruction message. The message can replace the actual contractual document such as for instance a Waybill, under those circumstances where there are no legal or other restrictions.

The message might contain information concerning charges but should not be seen as a replacement for the invoice.

  • A consignment may contain several goods items.
  • Goods items may or may not be containerized.
  • A goods item may be transported in one or more containers, and a single container may contain one or more goods items.
  • One goods item may be related to one or more customs tariff codes.
  • Goods items related to one customs tariff code may be carried in one or more containers.
  • Goods items may reflect either the contractual or operational description of the goods.
  • Pre-carriage (advanced haulage) and/or on-carriage (destination haulage) of goods items or equipment within one booking or instruction may take place in different steps, each step specified with its own transport details group.
  • Equipment may have other types of equipment attached to it, e.g. a temperature control unit attached to a container.
  • Equipment and/or goods items may be attached to or transported on another load or transport device, which as such may be attached to or transported on yet another load or transport device, e.g. a container on a chassis on a rail-car.
  • Transport devices, which have the ability of powered movement on their own, are specified in the transport details group. Other load or transport devices are specified as equipment.
  • The expression of packaging for goods items can be expressed at up to three levels.

A number of generic transport terms are used in this specification, to be described as:

  • MODE OF TRANSPORT: The method of transport used for the conveyance of goods or persons, e.g. by rail, by road, by sea.
  • MEANS OF TRANSPORT: The vehicle used for the transport of goods or persons, e.g. aircraft, truck, vessel.
  • TYPE OF MEANS OF TRANSPORT: The type of vehicle used in the transport process, e.g. wide body, tank truck, passenger vessel.
  • EQUIPMENT: Material resources necessary to facilitate the transport and handling of cargo. Transport equipment does under the given circumstances not have the ability to move by its own propulsion (e.g. sea container, trailer, unit load device, pallet).
  • TYPE OF EQUIPMENT: The type of material used, e.g. 40 feet container, four way pallet, mafi trailer.

2. REFERENCES

See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 1.


3. TERMS AND DEFINITIONS

See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 2.


4. MESSAGE DEFINITION


4.1. Data Segment Clarification

This section should be read in conjunction with the Branching Diagram and the Segment Table which indicate mandatory, conditional and repeating requirements.

0010 | UNH, Message header

A service segment starting and uniquely identifying a message. The message type code for the Instruction contract status message is IFTMCS.

Note: Instruction contract status messages conforming to this document must contain the following data in segment UNH, composite S009:

Data element0065IFTMCS
0052D
005495A
0051UN

0020 BGM, Beginning of message

A segment to indicate the beginning of a message and to transmit identifying number and type of the message.

0030 CTA, Contact information

A segment to identify a person or department to whom communication should be directed.

0040 COM, Communication contact

A segment to identify a communication number of a person or department to whom communication should be directed.

0050 DTM, Date/time/period

A segment to indicate a date and time applying to the whole message, e.g., date and time of document issue.

0060 TSR, Transport service requirements

A segment to identify the contract, conditions of carriage, services, and priority requirements for the transport.

0070 CUX, Currencies

A segment to indicate default currencies and exchange rates.

0080 MOA, Monetary amount

A segment to indicate a monetary value for entire consignment, e.g. insured value, invoice amount, disbursements, etc.

0090 FTX, Free text

A segment to specify free form or processable supplementary information, such as status of transport, remarks to be printed on the transport documents (where required), consignment remarks, insurance instructions, etc., or any other additional information.

0100 CNT, Control total

A segment to specify totals for a consignment.

0110 Segment Group 1: LOC-DTM

A group of segments to specify locations and related date(s)/time(s) which apply to the entire message, e.g. place of transshipment.

0120 LOC, Place/location identification

A segment to identify a location applying to the entire message.

0130 DTM, Date/time/period

A segment to indicate date(s) and time(s) relating to the location.

0140 Segment Group 2: TOD-LOC

A group of segments to specify terms of delivery and related locations.

0150 TOD, Terms of delivery or transport

A segment to specify the applicable terms of delivery.

0160 LOC, Place/location identification

A segment to specify a location related to the terms of delivery.

0170 Segment Group 3: RFF-DTM

A group of segments containing a reference and constants which apply to the entire message.

0180 RFF, Reference

A segment to express a reference which applies to the entire message such as: the document/message number that is to be updated by this very message (according to data element 1225 Message Function, Coded in segment BGM), booking reference, order number, insurance contract, etc.

0190 DTM, Date/time/period

A segment to indicate date and time relating to the reference.

0200 Segment Group 4: GOR-DTM-LOC-SEL-FTX-SG5

A group of segments to identify customs and other governmental procedures and required documents.

0210 GOR, Governmental requirements

A segment to indicate applicable governmental procedures related to import, export and transport of the goods.

0220 DTM, Date/time/period

A segment to indicate date and time related to documents and/or Customs- and/or governmental procedures for the consignment (e.g. date of issuing of Customs document, expiration date of Customs document, etc.).

0230 LOC, Place/location identification

A segment to specify locations associated with Customs-and/or governmental procedures for the consignment (e.g. Customs office of exit, Customs office of destination, etc.).

0240 SEL, Seal number

A segment to identify seals and seal issuer associated with the Customs procedure and/or Customs document for the consignment.

0250 FTX, Free text

A segment to provide additional governmental requirements information.

0260 Segment Group 5: DOC-DTM

A group of segments to specify required documents by government.

0270 DOC, Document/message details

A segment to indicate a document required by government.

0280 DTM, Date/time/period

A segment to specify the date/time related to the required document.

0290 Segment Group 6: CPI-CUX-LOC-MOA

A group of segments to indicate charge methodology which applies to the entire message.

0300 CPI, Charge payment instructions

A segment to indicate default charge methodology.

0310 CUX, Currencies

A segment to specify the payment currency related to the charge methodology.

0320 LOC, Place/location identification

A segment to identify the place of charge collection.

0330 MOA, Monetary amount

A segment to identify the monetary amount associated with the charges.

0340 Segment Group 7: TCC-LOC-FTX-CUX-PRI-EQN-PCD-MOA-QTY

A group of segments to specify charge calculations associated with the transport.

0350 TCC, Transport charge/rate calculations

A segment to specify charge.

0360 LOC, Place/location identification

A segment to indicate a location.

0370 FTX, Free text

A segment to specify processable supplementary information associated with charge.

0380 CUX, Currencies

A segment to specify currencies associated with charge.

0390 PRI, Price details

A segment to specify price details such as price (e.g. 100 dollars) and unit price basis (e.g. per 1000 kilograms).

0400 EQN, Number of units

A segment to specify the number of units to which the unit price basis applies.

0410 PCD, Percentage details

A segment to indicate the applicable reduction or surcharge percentage details.

0420 MOA, Monetary amount

A segment to specify a monetary amount, such as prepaid amount, discount or total amount.

0430 QTY, Quantity

A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight.

0440 Segment Group 8: TDT-DTM-TSR-SG9-SG10

A group of segments to indicate details of the movement of goods such as mode and means of transport, locations, departure, and arrival date(s) and time(s).

0450 TDT, Details of transport

A segment to indicate information related to a certain stage of the transport, such as mode, means and carrier.

0460 DTM, Date/time/period

A segment to indicate departure/arrival date and time.

0470 TSR, Transport service requirements

A segment to identify contract, conditions of carriage, services, priority requirements for this stage of transport.

0480 Segment Group 9: LOC-DTM

A group of segments to specify a location and date/time related to this leg of transport.

0490 LOC, Place/location identification

A segment to indicate a location such as origin, destination, stop off, etc. related to this leg of transport.

0500 DTM, Date/time/period

A segment to specify a date/time related to the location, such as arrival date/time of a means of transport at a specific location.

0510 Segment Group 10: RFF-DTM

A group of segments to specify an additional reference related to the stage of the transport.

0520 RFF, Reference

A segment to specify the additional reference.

0530 DTM, Date/time/period

A segment to identify date and time relating to the reference.

0540 Segment Group 11: NAD-LOC-MOA-SG12-SG13-SG14-SG15-SG16-SG17

A group of segments to identify a party, related references, locations contacts, required documents, and charges to be paid by the party.

0550 NAD, Name and address

A segment to identify the party's name, address, and function.

0560 LOC, Place/location identification

A segment to indicate location where a specific function will be performed.

0570 MOA, Monetary amount

A segment to identify the monetary amount associated with the party.

0580 Segment Group 12: CTA-COM

A group of segments identifying a contact and its communications related to the party.

0590 CTA, Contact information

A segment to identify a person or department within a party.

0600 COM, Communication contact

A segment to identify a communication number of a person or department to whom communication should be directed.

0610 Segment Group 13: DOC-DTM

A group of segments to identify required documents.

0620 DOC, Document/message details

A segment to identify a document required of, by or for the party.

0630 DTM, Date/time/period

A segment to identify date and time relating to the reference.

0640 Segment Group 14: TCC-PRI-EQN-PCD-MOA-QTY

A group of segments to specify charges associated with the party.

0650 TCC, Transport charge/rate calculations

A segment to specify charges associated with the party.

0660 PRI, Price details

A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilogram).

0670 EQN, Number of units

A segment to specify the number of units to which the unit price basis applies.

0680 PCD, Percentage details

A segment to indicate the applicable reduction or surcharge percentage details.

0690 MOA, Monetary amount

A segment to specify a monetary amount, such as prepaid amount, discount or total amount.

0700 QTY, Quantity

A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight.

0710 Segment Group 15: RFF-DTM

A group of segments to specify a reference related to the party.

0720 RFF, Reference

A segment to identify a reference used by a party.

0730 DTM, Date/time/period

A segment to indicate date and time relating to the reference.

0740 Segment Group 16: CPI-CUX-LOC-MOA

A group of segments to identify the charge and its amount to be paid by the party.

0750 CPI, Charge payment instructions

A segment to identify default charge methodology.

0760 CUX, Currencies

A segment to indicate payment currency related to the charge methodology.

0770 LOC, Place/location identification

A segment to identify the place of charge collection.

0780 MOA, Monetary amount

A segment to identify the monetary amount associated with the charges.

0790 Segment Group 17: TSR-RFF-LOC-TPL-FTX

A group of segments to specify a transport service requirement and its associated details (such as applicable commercial agreement) related to the party.

0800 TSR, Transport service requirements

A segment to specify a required service for the transport, such as re-icing.

0810 RFF, Reference

A segment to identify a commercial agreement related to the service requirement.

0820 LOC, Place/location identification

A segment to indicate the location where the required service must be performed, such as place of re-icing.

0830 TPL, Transport placement

A segment to identify the means of transport to which the service requirement applies.

0840 FTX, Free text

A segment to provide any additional information related to the service requirement.

0850 Segment Group 18: GID-HAN-TMP-RNG-TMD-LOC-MOA-PIA-FTX-SG19-GDS-

SG20-SG21-SG22-SG23-SG24-SG25-SG27-SG29-SG30 A group of segments to describe the goods items for which transport is undertaken.

0860 GID, Goods item details

A segment to identify a goods item for which transport is undertaken. A goods item can be identified by up to three levels of packaging.

0870 HAN, Handling instructions

A segment to specify handling instructions relating to the goods item.

0880 TMP, Temperature

A segment to specify a temperature setting for a goods item.

0890 RNG, Range details

A segment to specify a temperature range setting for a goods item.

0900 TMD, Transport movement details

A segment to specify transport movement details for a goods item.

0910 LOC, Place/location identification

A segment to specify a country associated with a goods item, such as country of origin, or country of destination.

0920 MOA, Monetary amount

A segment to specify a monetary amount associated with a goods item, such as declared value, FOB value, etc.

0930 PIA, Additional product id

A segment to specify article numbers.

0940 FTX, Free text

A segment to specify processable supplementary information relating to the goods item.

0950 Segment Group 19: NAD-DTM

A group of segments to identify different places of collection and/or delivery for the goods item.

0960 NAD, Name and address

A segment to specify an address of a place of collection or delivery for a goods item.

0970 DTM, Date/time/period

A segment to indicate date and time relating to the place of collection or delivery.

0980 GDS, Nature of cargo

A segment to describe the nature of cargo.

0990 Segment Group 20: MEA-EQN

A group of segments to specify measurements applicable to a goods item.

1000 MEA, Measurements

A segment to specify measurements, other than dimensions, applicable to a goods item.

1010 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

1020 Segment Group 21: DIM-EQN

A group of segments to specify dimensions applicable to a goods item.

1030 DIM, Dimensions

To specify dimensions applicable to a goods item.

1040 EQN, Number of units

A segment to specify the number of equipment units to each of which the given dimension applies.

1050 Segment Group 22: RFF-DTM

A group of segments to identify references to a goods item.

1060 RFF, Reference

A segment to identify a reference to a goods item.

1070 DTM, Date/time/period

A segment to indicate date and time relating to the reference.

1080 Segment Group 23: PCI-RFF-DTM

A group of segments to specify marks and numbers of a goods item.

1090 PCI, Package identification

A segment to specify marks and numbers of a good item.

1100 RFF, Reference

A segment to identify a reference relating to the marks and numbers.

1110 DTM, Date/time/period

A segment to identify date and time of the reference.

1120 Segment Group 24: DOC-DTM

A group of segments to specify documents and associated date(s) and time(s) for a goods item.

1130 DOC, Document/message details

A segment to specify a document prepared for a goods item.

1140 DTM, Date/time/period

A segment to associate date and time with the prepared document.

1150 Segment Group 25: TPL-SG26

A group of segments to identify transport details and associated measurements for a goods item. This group may be repeated to indicate the different phases of the movement.

1160 TPL, Transport placement

A segment to identify transport details for a goods item.

1170 Segment Group 26: MEA-EQN

A group of segments to identify measurements.

1180 MEA, Measurements

A segment to specify the distribution of a goods item among the transport details.

1190 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

1200 Segment Group 27: SGP-SG28

A group of segments to specify the distribution of a goods item among the transport equipment.

1210 SGP, Split goods placement

A segment to identify the equipment in which goods are transported.

1220 Segment Group 28: MEA-EQN

A group of segments to identify measurements.

1230 MEA, Measurements

A segment to specify measurements of that portion of the goods item in the equipment.

1240 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

1250 Segment Group 29: TCC-CUX-PRI-EQN-PCD-MOA-QTY-LOC

A group of segments to specify charge associated with the goods item.

1260 TCC, Transport charge/rate calculations

A segment to specify charge associated with the goods item.

1270 + CUX, Currencies

A segment to specify currencies associated with charge.

1280 PRI, Price details

A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilogram).

1290 EQN, Number of units

A segment to specify the number of units to which the unit price basis applies.

1300 PCD, Percentage details

A segment to indicate the applicable reduction or surcharge percentage details.

1310 MOA, Monetary amount

A segment to specify a monetary amount, such as prepaid amount, discount or total amount.

1320 QTY, Quantity

A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight.

1330 LOC, Place/location identification

A segment to indicate location where a specific function will be performed.

1340 Segment Group 30: DGS-FTX-SG31-SG32-SG33

A group of segments to specify dangerous goods details related to the goods item. One goods item may be in different dangerous goods classes.

1350 DGS, Dangerous goods

A segment to indicate the class of dangerous goods, packing group, etc.

1360 FTX, Free text

A segment to specify the dangerous goods technical name and to specify any additional dangerous goods information.

1370 Segment Group 31: CTA-COM

A group of segments to identify a contact to whom communication regarding the dangerous goods can be directed.

1380 CTA, Contact information

A segment to identify a person or department.

1390 COM, Communication contact

A segment to identify a communication number of a person or department.

1400 Segment Group 32: MEA-EQN

A group of segments to identify dangerous goods measurements.

1410 MEA, Measurements

A segment to specify measurements of the dangerous goods.

1420 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

1430 Segment Group 33: SGP-SG34

A group of segments to specify the distribution of the dangerous goods among the transport equipment.

1440 SGP, Split goods placement

A segment to identify the equipment in which the dangerous goods are transported.

1450 Segment Group 34: MEA-EQN

A group of segments to identify dangerous goods measurements.

1460 MEA, Measurements

A segment to specify measurements of that portion of the dangerous goods in the equipment.

1470 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

1480 Segment Group 35: EQD-EQN-TMD-MEA-DIM-SEL-TPL-HAN-TMP-FTX-SG36-

SG37-SG38 A group of segments to specify equipment in which goods are

1490 EQD, Equipment details

A segment to specify equipment, and equipment size and type used in the transport.

1500 EQN, Number of units

A segment to specify number of pieces of equipment required.

1510 TMD, Transport movement details

A segment to specify transport movement details for the equipment.

1520 MEA, Measurements

A segment to specify measurements, other than dimensions, associated with the equipment, such as weight.

1530 DIM, Dimensions

A segment to specify dimensions applicable to equipment.

1540 SEL, Seal number

A segment to identify seal and seal issuer associated with the equipment.

1550 TPL, Transport placement

A segment to identify transport details for the equipment.

1560 HAN, Handling instructions

A segment to specify handling instructions for specified equipment.

1570 TMP, Temperature

A segment to specify a temperature setting for the equipment.

1580 FTX, Free text

A segment to specify processable supplementary information associated with the equipment.

1590 Segment Group 36: TCC-PRI-EQN-PCD-MOA-QTY

A group of segments to specify charges associated with the equipment.

1600 TCC, Transport charge/rate calculations

A segment to specify a charge associated with the equipment.

1610 PRI, Price details

A segment to specify price details such as price (e.g. 100 dollar) and unit price basis (e.g. per 1000 kilogram).

1620 EQN, Number of units

A segment to specify the number of units to which the unit price basis applies.

1630 PCD, Percentage details

A segment to indicate the applicable reduction or surcharge percentage details.

1640 MOA, Monetary amount

A segment to specify a monetary amount, such as prepaid amount, discount or total amount.

1650 QTY, Quantity

A segment to indicate a quantity, for example actual weight, declared weight or chargeable weight.

1660 Segment Group 37: NAD-DTM

A group of segments to identify different equipment pick-up or drop-off places.

1670 NAD, Name and address

A segment to specify a pick-up or drop-off address.

1680 DTM, Date/time/period

A segment to indicate date and time relating to pick-up or drop-off.

1690 Segment Group 38: EQA-EQN

A group of segments to specify the attached equipment and related number of pieces.

1700 EQA, Attached equipment

A segment to identify attached or related equipment such as a chassis attached to a container.

1710 EQN, Number of units

A segment to specify number of pieces of equipment required.

1720 UNT, Message trailer

A service segment ending a message, giving the total number of segments in the message and the control reference number of the message.


4.2. Data segment index (Alphabetical sequence by tag)

BGM Beginning of message
CNT Control total
COM Communication contact
CPI Charge payment instructions
CTA Contact information
CUX Currencies
DGS Dangerous goods
DIM Dimensions
DOC Document/message details
DTM Date/time/period
EQA Attached equipment
EQD Equipment details
EQN Number of units
FTX Free text
GDS Nature of cargo
GID Goods item details
GOR Governmental requirements
HAN Handling instructions
LOC Place/location identification
MEA Measurements
MOA Monetary amount
NAD Name and address
PCD Percentage details
PCI Package identification
PIA Additional product id
PRI Price details
QTY Quantity
RFF Reference
RNG Range details
SEL Seal number
SGP Split goods placement
TCC Transport charge/rate calculations
TDT Details of transport
TMD Transport movement details
TMP Temperature
TOD Terms of delivery or transport
TPL Transport placement
TSR Transport service requirements
UNH Message header
UNT Message trailer

4.3. Message structure


4.3.1. Segment table

├─UNH Message header ×1 (M)
├─BGM Beginning of message ×1 (M)
├─CTA Contact information ×1 (C)
├─COM Communication contact ×9 (C)
├─DTM Date/time/period ×9 (C)
├─TSR Transport service requirements ×9 (C)
├─CUX Currencies ×9 (C)
├─MOA Monetary amount ×99 (C)
├─FTX Free text ×99 (C)
├─CNT Control total ×9 (C)
├─Segment Group 1 ×99 (C)
├─LOC Place/location identification ×1 (M)
└─DTM Date/time/period ×9 (C)
├─Segment Group 2 ×2 (C)
├─TOD Terms of delivery or transport ×1 (M)
└─LOC Place/location identification ×9 (C)
├─Segment Group 3 ×99 (C)
├─RFF Reference ×1 (M)
└─DTM Date/time/period ×9 (C)
├─Segment Group 4 ×9 (C)
├─GOR Governmental requirements ×1 (M)
├─DTM Date/time/period ×9 (C)
├─LOC Place/location identification ×9 (C)
├─SEL Seal number ×9 (C)
├─FTX Free text ×9 (C)
└─Segment Group 5 ×9 (C)
──├─DOC Document/message details ×1 (M)
──└─DTM Date/time/period ×1 (C)
├─Segment Group 6 ×9 (C)
├─CPI Charge payment instructions ×1 (M)
├─CUX Currencies ×1 (C)
├─LOC Place/location identification ×9 (C)
└─MOA Monetary amount ×9 (C)
├─Segment Group 7 ×99 (C)
├─TCC Transport charge/rate calculations ×1 (M)
├─LOC Place/location identification ×1 (C)
├─FTX Free text ×1 (C)
├─CUX Currencies ×1 (C)
├─PRI Price details ×1 (C)
├─EQN Number of units ×1 (C)
├─PCD Percentage details ×1 (C)
├─MOA Monetary amount ×9 (C)
└─QTY Quantity ×9 (C)
├─Segment Group 8 ×99 (M)
├─TDT Details of transport ×1 (M)
├─DTM Date/time/period ×9 (C)
├─TSR Transport service requirements ×9 (C)
├─Segment Group 9 ×99 (C)
├─LOC Place/location identification ×1 (M)
└─DTM Date/time/period ×1 (C)
└─Segment Group 10 ×9 (C)
──├─RFF Reference ×1 (M)
──└─DTM Date/time/period ×1 (C)
├─Segment Group 11 ×99 (C)
├─NAD Name and address ×1 (M)
├─LOC Place/location identification ×9 (C)
├─MOA Monetary amount ×9 (C)
├─Segment Group 12 ×9 (C)
├─CTA Contact information ×1 (M)
└─COM Communication contact ×9 (C)
├─Segment Group 13 ×9 (C)
├─DOC Document/message details ×1 (M)
└─DTM Date/time/period ×1 (C)
├─Segment Group 14 ×99 (C)
├─TCC Transport charge/rate calculations ×1 (M)
├─PRI Price details ×1 (C)
├─EQN Number of units ×1 (C)
├─PCD Percentage details ×1 (C)
├─MOA Monetary amount ×9 (C)
└─QTY Quantity ×9 (C)
├─Segment Group 15 ×9 (C)
├─RFF Reference ×1 (M)
└─DTM Date/time/period ×9 (C)
├─Segment Group 16 ×9 (C)
├─CPI Charge payment instructions ×1 (M)
├─CUX Currencies ×1 (C)
├─LOC Place/location identification ×9 (C)
└─MOA Monetary amount ×9 (C)
└─Segment Group 17 ×99 (C)
──├─TSR Transport service requirements ×1 (M)
──├─RFF Reference ×1 (C)
──├─LOC Place/location identification ×1 (C)
──├─TPL Transport placement ×1 (C)
──└─FTX Free text ×9 (C)
├─Segment Group 18 ×999 (C)
├─GID Goods item details ×1 (M)
├─HAN Handling instructions ×1 (C)
├─TMP Temperature ×1 (C)
├─RNG Range details ×1 (C)
├─TMD Transport movement details ×1 (C)
├─LOC Place/location identification ×9 (C)
├─MOA Monetary amount ×9 (C)
├─PIA Additional product id ×9 (C)
├─FTX Free text ×9 (C)
├─Segment Group 19 ×9 (C)
├─NAD Name and address ×1 (M)
└─DTM Date/time/period ×1 (C)
├─GDS Nature of cargo ×9 (C)
├─Segment Group 20 ×99 (C)
├─MEA Measurements ×1 (M)
└─EQN Number of units ×1 (C)
├─Segment Group 21 ×99 (C)
├─DIM Dimensions ×1 (M)
└─EQN Number of units ×1 (C)
├─Segment Group 22 ×9 (C)
├─RFF Reference ×1 (M)
└─DTM Date/time/period ×9 (C)
├─Segment Group 23 ×9 (C)
├─PCI Package identification ×1 (M)
├─RFF Reference ×1 (C)
└─DTM Date/time/period ×1 (C)
├─Segment Group 24 ×9 (C)
├─DOC Document/message details ×1 (M)
└─DTM Date/time/period ×9 (C)
├─Segment Group 25 ×9 (C)
├─TPL Transport placement ×1 (M)
└─Segment Group 26 ×9 (C)
──├─MEA Measurements ×1 (M)
──└─EQN Number of units ×1 (C)
├─Segment Group 27 ×999 (C)
├─SGP Split goods placement ×1 (M)
└─Segment Group 28 ×9 (C)
──├─MEA Measurements ×1 (M)
──└─EQN Number of units ×1 (C)
├─Segment Group 29 ×99 (C)
├─TCC Transport charge/rate calculations ×1 (M)
├─CUX Currencies ×1 (C)
├─PRI Price details ×1 (C)
├─EQN Number of units ×1 (C)
├─PCD Percentage details ×1 (C)
├─MOA Monetary amount ×9 (C)
├─QTY Quantity ×9 (C)
└─LOC Place/location identification ×9 (C)
└─Segment Group 30 ×9 (C)
──├─DGS Dangerous goods ×1 (M)
──├─FTX Free text ×99 (C)
──├─Segment Group 31 ×9 (C)
──├─CTA Contact information ×1 (M)
──└─COM Communication contact ×9 (C)
──├─Segment Group 32 ×9 (C)
──├─MEA Measurements ×1 (M)
──└─EQN Number of units ×1 (C)
──└─Segment Group 33 ×999 (C)
────├─SGP Split goods placement ×1 (M)
────└─Segment Group 34 ×9 (C)
──────├─MEA Measurements ×1 (M)
──────└─EQN Number of units ×1 (C)
├─Segment Group 35 ×999 (C)
├─EQD Equipment details ×1 (M)
├─EQN Number of units ×1 (C)
├─TMD Transport movement details ×1 (C)
├─MEA Measurements ×9 (C)
├─DIM Dimensions ×9 (C)
├─SEL Seal number ×99 (C)
├─TPL Transport placement ×9 (C)
├─HAN Handling instructions ×1 (C)
├─TMP Temperature ×1 (C)
├─FTX Free text ×9 (C)
├─Segment Group 36 ×99 (C)
├─TCC Transport charge/rate calculations ×1 (M)
├─PRI Price details ×1 (C)
├─EQN Number of units ×1 (C)
├─PCD Percentage details ×1 (C)
├─MOA Monetary amount ×9 (C)
└─QTY Quantity ×9 (C)
├─Segment Group 37 ×9 (C)
├─NAD Name and address ×1 (M)
└─DTM Date/time/period ×1 (C)
└─Segment Group 38 ×99 (C)
──├─EQA Attached equipment ×1 (M)
──└─EQN Number of units ×1 (C)
└─UNT Message trailer ×1 (M)

5. Annex A Example (Details of transport)

1. TDT+20+HL12345+1:MARITIME+:CONTAINER VESSEL+:::HAPAG LLOYD+++PHXXX:::FAITHFUL' Notes: 20 indicates 'main transport' (d.e. 8051); HL12345 is assigned by the carrier (d.e. 8028; is the 'flight number' in the air mode); PHXXX is the radio call sign (d.e. 8213); 'FAITHFUL' is the name of the vessel

2. TDT+20+91/05/0021+3:ROAD++:::INT. TRUCKING CO.+++BB-10-XX::::NL' Note: BB-10-XX represents the (Dutch) truck registration no.


Change indicators
plus sign An addition.
asterisk Addition/substraction/change to a code entry for a particular data element.
hash or pound sign Changes to names.
vertical bar Changes to text for descriptions, notes and functions.
minus sign A deletion.
letter X Marked for deletion.

Return to EDIFACT D95A Messages page.