Cargo/goods handling and movement message
|
This message is available for formal trial for at least six months from the date of approval by UN/ECE/TRADE/WP.4. Organisations are invited to trial this message. Comments on the results from the trial should be forwarded to their Rapporteur's Team Secretariat as soon as they are available. Based on the results of the trials, a UNSM may be issued. The segments, composite data elements, data elements and codes for use in the trial of this message are contained in the Draft directory. However, this information may differ from that in the Standard Directory (UNTDID), even for material having the same identifying tags. |
| Message Type: | HANMOV |
|---|---|
| Version: | D |
| Release: | 94A |
| Contr. Agency: | UN |
| Status: | 1 |
| Revision: | 1 |
| Date: | 94-09-21 |
| SOURCE: | Western European EDIFACT Board |
|
For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.6, UN/ECE UNSM General Introduction |
|
This message also occurs in the following versions of this standard: D94A, D94B, D95A, D95B, D96A, D96B, D97A, D97B, D98A, D98B, D99A, D99B, D00A, D00B, D01A, D01B, D01C, D02A, D02B, D03A, D03B, D04A, D04B |
0. INTRODUCTION
This specification provides the definition of the Cargo/goods handling and movement message (HANMOV) to be used in Electronic Data Interchange (EDI) between trading partners, involved in administration, commerce and transport.
1. SCOPE
1.1. Functional Definition
A message from a party to a warehouse/distribution center identifying the handling services and where required the movement of specified goods, limited to warehouses within the jurisdiction of the distribution centre.
1.2. Field of Application
The Cargo/goods handling and movement message may be used for both national and international trade. It is based on universal commercial practice and is not dependent on the type of business or industry.
1.3. Principles
This message addresses the indirect flow of goods between seller and buyer through a warehouse/distribution center.
The functions of this message are limited to:
- assembly/disassembly of goods and products, without interfering in the manufacturing process
- (re-)packing/unpacking
- control of goods associated with the handling services but not interfering in the manufacturing process
- marking and labeling on the packages of the goods but does not extend to the marking and labeling of the products
- movement of goods limited between warehouses within the jurisdiction of the distribution center
- preparation of goods for shipment
- storage
- clearance
- goods inspection
- hazardous material handling
The movement of specified goods relates here to the area where control of the goods is to be exercised from the arrival of the goods to the distribution center until the departure of the goods from the distribution center to another party. It can include movements between warehouses within the jurisdiction of the distribution center. Other movements of goods will be given by the relevant instruction messages, i.e. IFTMIN (Instruction message) and Instruction For Despatch (message under development).
The functions Assembly/Disassembly are meant to make the goods ready for delivery to the final customer, they are not part of the actual manufacturing or assembly process.
- Goods items may or may not be containerized.
- A goods item may be in one or pieces of equipment, and a single equipment may contain one or more goods items.
- One goods item and/or line item may be related to one or more customs tariff codes.
- Goods items may reflect either the contractual or operational description of the goods.
- Equipment may have other types of equipment attached to it, e.g. a temperature control unit attached to a container.
- Equipment and/or goods items may be attached to another load or transport device, which as such may be attached to yet another load or transport device, e.g. a container on a chassis on a railway wagon.
- Transport devices, which have the ability of powered movement on their own, are specified in the transport details group. Other load or transport devices are specified as equipment.
- The expression of packaging for goods items in the GID segment can be expressed at up to three levels.
A number of generic transport terms are described in the Annex (glossary of terms).
2. REFERENCES
See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 1.
3. TERMS AND DEFINITIONS
See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 2.
4. MESSAGE DEFINITION
4.1. Data Segment Clarification
This section should be read in conjunction with the Branching Diagram and the Segment Table which indicate mandatory, conditional and repeating requirements.
0010 UNH, Message header
A service segment starting and uniquely identifying a message. The message type code for the Cargo/goods handling and movement message is HANMOV.
Note: Cargo/goods handling and movement messages conforming to this document must contain the following data in segment UNH, composite S009:
| Data element | 0065 | HANMOV |
| 0052 | D | |
| 0054 | 94A | |
| 0051 | UN |
0020 BGM, Beginning of message
A segment to indicate the beginning of the message by identifying the message by a document/message number.
0030 DTM, Date/time/period
A segment to indicate date(s), time(s) and periods relating to the whole message, e.g. document/message date.
0040 HAN, Handling instructions
A segment providing information on general handling instructions applicable to all data in the message, e.g. assembly and/or preparation of goods for shipment.
0050 FTX, Free text
A segment to specify free form or processable supplementary information. In computer-to-computer exchanges free form text will normally require the receiver to process this segment manually.
0060 CNT, Control total
A segment to specify control totals.
0070 Segment Group 1: TCC-LOC-FTX-CUX
A group of segments to specify charges associated with the handling.
0080 TCC, Transport charge/rate calculations
A segment to specify a charge.
0090 LOC, Place/location identification
A segment to indicate a location where the chargeable action is (to be) performed.
0100 FTX, Free text
A segment to specify processable supplementary information associated with charge.
0110 CUX, Currencies
A segment to specify currencies associated with charge.
0120 Segment Group 2: RFF-DTM
A group of segments containing references and constants which apply to the entire message.
0130 RFF, Reference
A segment to express a reference which applies to the entire message such as: the document/message number that is to be updated by this very message (according to data element 1225 - Message function, coded in segment BGM).
0140 DTM, Date/time/period
A segment to indicate date and time relating to the reference.
0150 Segment Group 3: NAD-LOC-DOC-SG4-SG5
A group of segments to identify a party, related references, locations, contacts and required documents.
0160 NAD, Name and address
A segment to identify the party's name, address and function, e.g. warehouse/distribution centre.
0170 LOC, Place/location identification
A segment to indicate a location where a specific function will be performed.
0180 DOC, Document/message details
A segment to identify a document required of, by or for the party.
0190 Segment Group 4: RFF-DTM
A group of segments to specify a reference related to the party.
0200 RFF, Reference
A segment to identify a reference used by a party.
0210 DTM, Date/time/period
A segment to indicate date and time relating to the reference.
0220 Segment Group 5: CTA-COM
A group of segments identifying a contact and its communications related to the party.
0230 CTA, Contact information
A segment to identify a person or department within the party.
0240 COM, Communication contact
A segment to identify a communication number of a person or department to whom communication should be directed.
0250 Segment Group 6: TDT-DTM-LOC-RFF
A group of segments to indicate details of the movement of goods such as mode and means of transport, locations, departure, and arrival date(s) and time(s).
0260 TDT, Details of transport
A segment to indicate information related to a certain stage of the transport, such as mode, means and carrier.
0270 DTM, Date/time/period
A segment to indicate date and time relevant to the transport details, e.g. departure date/time.
0280 LOC, Place/location identification
A segment to indicate a location such as transport origin, destination, stop-off, etc.
0290 RFF, Reference
A segment to specify an additional reference related to the stage of the transport.
0300 Segment Group 7: LIN-PIA-IMD-HAN-TCC-SG8-MEA-QTY-GIN-GIR-
DTM-FTX-SG10-LOC-SG11 A group of segments providing details of the individually handled product items.
0310 LIN, Line item
A segment identifying the product item being handled or the resulting product code after assembly or disassembly.
0320 PIA, Additional product id
A segment providing additional product identification, e.g. EAN number.
0330 IMD, Item description
A segment to describe the product being handled. This segment should be used for products that cannot be identified by a product code or article number.
0340 HAN, Handling instructions
A segment to specify handling instructions specific to the product item in addition to and not overriding the handling instructions on message level.
0350 TCC, Transport charge/rate calculations
A segment to specify a charge associated with the product item, e.g. assembly charge.
0360 Segment Group 8: NAD-SG9
A group of segments for identifying names and addresses and their functions.
0370 NAD, Name and address
A segment to identify the party's name, address and function, e.g. seller, buyer, inspecting party. It is recommended that where possible only the coded form of the party identification should be specified, e.g. when the buyer and seller are known to each other.
0380 Segment Group 9: CTA-COM
A group of segments identifying a contact and its communications related to the party.
0390 CTA, Contact information
A segment to identify a person or department within a party.
0400 COM, Communication contact
A segment to identify a communication number of a person or department to whom communication should be directed.
0410 MEA, Measurements
A segment identifying physical measurements of the handled product item in original or unpacked form.
0420 QTY, Quantity
A segment to give quantity information concerning the product.
0430 GIN, Goods identity number
A segment providing identity numbers of the goods being handled, e.g. serial numbers for assembled products.
0440 GIR, Related identification numbers
A segment providing sets of related identification numbers for a product item, e.g. in case of assembly (disassembly) engine number, chassis number and transmission number for a vehicle.
0450 DTM, Date/time/period
A segment providing date/time information related to the product item, e.g. production date.
0460 FTX, Free text
A segment to specify free form or processable information, which further clarifies, when required, the product item. In computer-to-computer exchanges free form text will normally require the receiver to process this segment manually.
0470 Segment Group 10: RFF-DTM-LOC
A group of segments to give reference numbers and dates.
0480 RFF, Reference
A segment identifying a reference related to the product item and/or a reference as a pointer to the goods item number in the GID group.
0490 DTM, Date/time/period
A segment to specify date/time/period relating to the reference.
0500 LOC, Place/location identification
A segment identifying a specific location, e.g. within the warehouse/distribution center.
0510 Segment Group 11: PAC-MEA-QTY-SG12
A group of segments providing details how the product item is packed, such as number and type of packages, physical measurements and quantities.
0520 PAC, Package
A segment to describe packaging details for the product item.
0530 MEA, Measurements
A segment specifying physical measurements of packages.
0540 QTY, Quantity
A segment to specify a quantity of products per package.
0550 Segment Group 12: PCI-GIN
A group of segments identifying one specific package or a number of packages, their marks and numbers.
0560 PCI, Package identification
A segment specifying marking and labels used on individual packages or a range of packages.
0570 GIN, Goods identity number
A segment providing identification numbers being applied to the packages handled.
0580 Segment Group 13: GID-HAN-CST-TMP-RNG-LOC-MOA-PIA-FTX-NAD-MEA-
DIM-RFF-PCI-SG14-SGP-TCC-SG15 A group of segments to describe the goods items for which transport is undertaken.
0590 GID, Goods item details
A segment to identify a goods item for which handling is specified. A goods item can be identified at up to three levels of packaging.
0600 HAN, Handling instructions
A segment to specify handling instructions specific to the goods item in addition to and not overriding the handling instructions on message level.
0610 CST, Customs status of goods
A segment to specify goods in terms of customs identities.
0620 TMP, Temperature
A segment to specify a temperature setting for a goods item.
0630 RNG, Range details
A segment to specify a temperature range setting for a goods item.
0640 LOC, Place/location identification
A segment identifying a specific location, e.g. within the warehouse/distribution center.
0650 MOA, Monetary amount
A segment to specify a monetary amount associated with a goods item, such as declared value, FOB value, etc.
0660 PIA, Additional product id
A segment to specify article numbers, e.g. in case of repackaging.
0670 FTX, Free text
A segment to specify processable supplementary information relating to the goods item, e.g. goods description.
0680 NAD, Name and address
A segment to specify an address of a place of collection or delivery or inspecting party for a goods item.
0690 MEA, Measurements
A segment to specify measurements, other than dimensions, applicable to a goods item.
0700 DIM, Dimensions
A segment to specify dimensions applicable to a goods item.
0710 RFF, Reference
A segment to identify a reference to a goods item.
0720 PCI, Package identification
A segment to specify marks and numbers of a goods item.
0730 Segment Group 14: DOC-DTM
A group of segments to specify documents and associated date(s) and time(s) for a goods item.
0740 DOC, Document/message details
A segment to specify a document prepared for a goods item.
0750 DTM, Date/time/period
A segment to associate date and time with the prepared document.
0760 SGP, Split goods placement
A segment to identify the equipment in which goods are loaded.
0770 TCC, Transport charge/rate calculations
A segment to specify charge associated with the goods item.
0780 Segment Group 15: DGS-FTX-MEA
A group of segments to specify dangerous goods details related to the goods item. One goods item may be in different dangerous goods classes.
0790 DGS, Dangerous goods
A segment to indicate the class of dangerous goods, packing group, etc.
0800 FTX, Free text
A segment to specify the dangerous goods technical name and to specify any additional dangerous goods information.
0810 MEA, Measurements
A segment to specify measurements of that portion of the dangerous goods in the equipment.
0820 Segment Group 16: EQD-EQN-SEL-EQA
A group of segments to specify equipment in which goods are loaded.
0830 EQD, Equipment details
A segment to specify equipment and equipment size and type used in the transport.
0840 EQN, Number of units
A segment to identify the number of pieces of equipment.
0850 SEL, Seal number
A segment to identify seal and seal issuer associated with the equipment.
0860 EQA, Attached equipment
A segment to identify attached or related equipment such as chassis attached to a container.
0870 UNT, Message trailer
A service segment ending a message, giving the total number of segments in the message and the control
4.2. Data segment index (Alphabetical sequence by tag)
| BGM | Beginning of message | |
 |
CNT | Control total |
| COM | Communication contact | |
| CST | Customs status of goods | |
| CTA | Contact information | |
| CUX | Currencies | |
| DGS | Dangerous goods | |
| DIM | Dimensions | |
| DOC | Document/message details | |
| DTM | Date/time/period | |
| EQA | Attached equipment | |
| EQD | Equipment details | |
| EQN | Number of units | |
| FTX | Free text | |
| GID | Goods item details | |
| GIN | Goods identity number | |
| GIR | Related identification numbers | |
| HAN | Handling instructions | |
| IMD | Item description | |
| LIN | Line item | |
| LOC | Place/location identification | |
| MEA | Measurements | |
| MOA | Monetary amount | |
| NAD | Name and address | |
| PAC | Package | |
| PCI | Package identification | |
| PIA | Additional product id | |
| QTY | Quantity | |
| RFF | Reference | |
| RNG | Range details | |
| SEL | Seal number | |
| SGP | Split goods placement | |
| TCC | Transport charge/rate calculations | |
| TDT | Details of transport | |
| TMP | Temperature | |
| UNH | Message header | |
| UNT | Message trailer |
4.3. Message structure
4.3.1. Segment table
| ├─UNH Message header | ×1 | (M) |
| ├─BGM Beginning of message | ×1 | (M) |
| ├─DTM Date/time/period | ×9 | (C) |
| ├─HAN Handling instructions | ×9 | (C) |
| ├─FTX Free text | ×9 | (C) |
| ├─CNT Control total | ×9 | (C) |
| ├─Segment Group 1 | ×9 | (C) |
| │─├─TCC Transport charge/rate calculations | ×1 | (M) |
| │─├─LOC Place/location identification | ×9 | (C) |
| │─├─FTX Free text | ×9 | (C) |
| │─└─CUX Currencies | ×9 | (C) |
| ├─Segment Group 2 | ×9 | (C) |
| │─├─RFF Reference | ×1 | (M) |
| │─└─DTM Date/time/period | ×9 | (C) |
| ├─Segment Group 3 | ×9 | (C) |
| │─├─NAD Name and address | ×1 | (M) |
| │─├─LOC Place/location identification | ×9 | (C) |
| │─├─DOC Document/message details | ×9 | (C) |
| │─├─Segment Group 4 | ×9 | (C) |
| │─│─├─RFF Reference | ×1 | (M) |
| │─│─└─DTM Date/time/period | ×9 | (C) |
| │─└─Segment Group 5 | ×1 | (C) |
| │───├─CTA Contact information | ×1 | (M) |
| │───└─COM Communication contact | ×9 | (C) |
| ├─Segment Group 6 | ×9 | (C) |
| │─├─TDT Details of transport | ×1 | (M) |
| │─├─DTM Date/time/period | ×9 | (C) |
| │─├─LOC Place/location identification | ×9 | (C) |
| │─└─RFF Reference | ×9 | (C) |
| ├─Segment Group 7 | ×99 | (C) |
| │─├─LIN Line item | ×1 | (M) |
| │─├─PIA Additional product id | ×9 | (C) |
| │─├─IMD Item description | ×99 | (C) |
| │─├─HAN Handling instructions | ×9 | (C) |
| │─├─TCC Transport charge/rate calculations | ×9 | (C) |
| │─├─Segment Group 8 | ×9 | (C) |
| │─│─├─NAD Name and address | ×1 | (M) |
| │─│─└─Segment Group 9 | ×1 | (C) |
| │─│───├─CTA Contact information | ×1 | (M) |
| │─│───└─COM Communication contact | ×9 | (C) |
| │─├─MEA Measurements | ×9 | (C) |
| │─├─QTY Quantity | ×9 | (C) |
| │─├─GIN Goods identity number | ×99 | (C) |
| │─├─GIR Related identification numbers | ×99 | (C) |
| │─├─DTM Date/time/period | ×9 | (C) |
| │─├─FTX Free text | ×9 | (C) |
| │─├─Segment Group 10 | ×9 | (C) |
| │─│─├─RFF Reference | ×1 | (M) |
| │─│─└─DTM Date/time/period | ×1 | (C) |
| │─├─LOC Place/location identification | ×9 | (C) |
| │─└─Segment Group 11 | ×99 | (C) |
| │───├─PAC Package | ×1 | (M) |
| │───├─MEA Measurements | ×9 | (C) |
| │───├─QTY Quantity | ×9 | (C) |
| │───└─Segment Group 12 | ×9 | (C) |
| │─────├─PCI Package identification | ×1 | (M) |
| │─────└─GIN Goods identity number | ×9 | (C) |
| ├─Segment Group 13 | ×99 | (C) |
| │─├─GID Goods item details | ×1 | (M) |
| │─├─HAN Handling instructions | ×1 | (C) |
| │─├─CST Customs status of goods | ×1 | (C) |
| │─├─TMP Temperature | ×1 | (C) |
| │─├─RNG Range details | ×1 | (C) |
| │─├─LOC Place/location identification | ×9 | (C) |
| │─├─MOA Monetary amount | ×9 | (C) |
| │─├─PIA Additional product id | ×9 | (C) |
| │─├─FTX Free text | ×9 | (C) |
| │─├─NAD Name and address | ×9 | (C) |
| │─├─MEA Measurements | ×9 | (C) |
| │─├─DIM Dimensions | ×9 | (C) |
| │─├─RFF Reference | ×9 | (C) |
| │─├─PCI Package identification | ×9 | (C) |
| │─├─Segment Group 14 | ×9 | (C) |
| │─│─├─DOC Document/message details | ×1 | (M) |
| │─│─└─DTM Date/time/period | ×9 | (C) |
| │─├─SGP Split goods placement | ×9 | (C) |
| │─├─TCC Transport charge/rate calculations | ×9 | (C) |
| │─└─Segment Group 15 | ×9 | (C) |
| │───├─DGS Dangerous goods | ×1 | (M) |
| │───├─FTX Free text | ×9 | (C) |
| │───└─MEA Measurements | ×9 | (C) |
| ├─Segment Group 16 | ×9 | (C) |
| │─├─EQD Equipment details | ×1 | (M) |
| │─├─EQN Number of units | ×1 | (C) |
| │─├─SEL Seal number | ×1 | (C) |
| │─└─EQA Attached equipment | ×99 | (C) |
| └─UNT Message trailer | ×1 | (M) |
Return to EDIFACT D94A Messages page.