Container gate-in/gate-out report message
|
This message is available for formal trial for at least six months from the date of approval by UN/ECE/TRADE/WP.4. Organisations are invited to trial this message. Comments on the results from the trial should be forwarded to their Rapporteur's Team Secretariat as soon as they are available. Based on the results of the trials, a UNSM may be issued. The segments, composite data elements, data elements and codes for use in the trial of this message are contained in the Draft directory. However, this information may differ from that in the Standard directory (UNTDID), even for material having the same identifying tags. |
| Message Type: | CODECO |
|---|---|
| Version: | D |
| Release: | 96B |
| Contr. Agency: | UN |
| Status: | 1 |
| Revision: | 2 |
| Date: | 96-07-04 |
| SOURCE: | Joint Transport Group (JM4) |
|
For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.6, UN/ECE UNSM General Introduction |
|
This message also occurs in the following versions of this standard: D95A, D95B, D96A, D96B, D97A, D97B, D98A, D98B, D99A, D99B, D00A, D00B, D01A, D01B, D01C, D02A, D02B, D03A, D03B, D04A, D04B |
0. INTRODUCTION
This specification provides the definition of the Container gate-in/gate-out report message (CODECO) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport.
1. SCOPE
1.1. Functional Definition
A message by which a terminal, depot, etc. confirms that the containers specified have been delivered or picked up by the inland carrier (road, rail or barge). This message can also be used to report internal terminal container movements (excluding loading and discharging the vessel).
This message is part of a total set of container-related messages. These messages serve to facilitate the intermodal handling of containers by streamlining the information exchange. The business scenario for the container messages is clarified in a separate document, called: 'Guide to the scenario of EDIFACT container messages'.
1.2. Field of Application
The Container gate-in/gate-out report message may be used for both national and international trade. It is based on universal commercial practice and is not dependent on the type of business or industry.
1.3. | Principles
Business area: Pre- and on-carriage transport of containers/equipment.
Sending functions include: Container depot, Inland terminal, Container freight station
Receiving functions include: Shipping agent, Logistic center, Shipper (copy), Freight forwarder (copy) and Inland carrier (copy)
In the context of the 'Guide to the scenario of EDIFACT container messages' (as referred to at the start of section 1) the following guidelines, rules and functionality apply to this Container gate-in/gate-out report message:
- The message contents can be uniquely identified by a combination of the following data elements:
- ordering customer, coded (NAD)
- ordering customer agent, coded (NAD)
- container announcement reference (being the release order reference number or the acceptance order reference number) (RFF)
The ordering customer agent, coded is needed to supplement the unique identification only in the next situation: the agent acts on behalf of several ordering customers issuing the same range of reference numbers for each customer. E.g. the ship's agent acts on behalf of several shipping lines issuing for each shipping line the same range of numbers.
- A copy of this message may be sent e.g. to the shipper, freight forwarder, the inland waterways and rail carriers, according to the communication addresses as mentioned in the Container announcement.
- One message may contain several containers.
- A supplementary container reference (container sequence number) is used to refer to the information of the container(s) in the Container announcement, if the container prefix and number was not completed in that message.
- An indicator for the transport status (i.e. export, import, transhipment or continental) is to be completed on container level (EQD-segment).
- One shipping line can be specified on message level.
- The seagoing vessel and sea voyage number can be specified on message level.
- Inland transport details can be specified for each individual container.
- For each container its place of discharge or its position of loading (stowage cell) in/on the means of inland transport can be specified.
- In case of export the port of discharge and any port of transhipment can be specified for each individual container.
- The date/time of pick-up and final address of positioning or the date/time of delivery must be given for each container.
- For each container seals can be specified affixed by the shipper, container freight station, terminal, sea carrier and Customs.
2. REFERENCES
See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 1.
3. TERMS AND DEFINITIONS
See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 2.
4. MESSAGE DEFINITION
4.1. Data Segment Clarification
This section should be read in conjunction with the Branching Diagram and the Segment Table which indicate mandatory, conditional and repeating requirements.
0010 UNH, Message header
A service segment starting and uniquely identifying a message. The message type code for the Container gate-in/gate-out report message is CODECO.
Note: Container gate-in/gate-out report messages conforming to this document must contain the following data in segment UNH, composite S009:
| Data element | 0065 | CODECO |
| 0052 | D | |
| 0054 | 96B | |
| 0051 | UN |
0020 BGM, Beginning of message
A segment to indicate the beginning of a message and to transmit identifying number and the further specification of the message type (in data element 1001: Document/message name, coded), such as Gate-in report, Gate-out report.
0030 + DTM, Date/time/period
A segment to indicate a date and/or time applying to the whole message, such as date and time of document or message issue.
0040 FTX, Free text
A segment to specify free form or processable supplementary information, such as: - change information
0050 Segment Group 1: RFF-DTM
A group of segments to specify a reference relating to the whole message, and its date and/or time.
0060 | RFF, Reference
A segment to express a reference which applies to the entire message, such as: - reference to previous message - container announcement reference number - release order reference - acceptance order reference
0070 + DTM, Date/time/period
A segment to indicate date and/or time related to the reference.
0080 Segment Group 2: TDT-RFF-LOC-DTM
A group of segments to indicate information relating to the main carriage stage of the transport (sea).
0090 TDT, Details of transport
A segment to indicate transport details related to the main carriage stage of the transport (sea), such as carrier/liner service.
0100 RFF, Reference
A segment to provide a reference for the liner service, such as: - conference - marketing organization - syndicate - vessel sharing agreement
0110 LOC, Place/location identification
A segment to indicate a place/port corresponding to the main carriage stage.
0120 DTM, Date/time/period
A segment to indicate a date/time relating to the main carriage.
0130 Segment Group 3: NAD-SG4
A group of segments to identify a party and/or addresses and related contacts.
0140 NAD, Name and address
A segment to identify the party's name and address, and function, such as: - message recipient - message sender - ordering customer - ordering customer agent
0150 Segment Group 4: CTA-COM
A group of segments to identify a contact and its communications related to the party.
0160 CTA, Contact information
A segment to identify a person or department of a message sender and/or message recipient, such as: - information contact
0170 + COM, Communication contact
A segment to identify a communication number of a person or department to whom communication should be directed.
0180 Segment Group 5: GID-HAN-FTX-PIA-MEA-TMP-RNG-SGP-SG6
A group of segments to describe the goods items (to be) stuffed in or (to be) stripped from the containers.
0190 GID, Goods item details
A segment to identify a goods item (to be) stuffed in or (to be) stripped from the containers.
0200 HAN, Handling instructions
A segment to specify handling instructions relating to the goods item, such as: - hazardous cargo - off-dimensions - Customs clearance
0210 FTX, Free text
A segment to describe the goods item or to provide special instructions.
0220 PIA, Additional product id
A segment to identify a commodity code.
0230 MEA, Measurements
A segment to specify a measurement, other than dimensions, for the goods item.
0240 TMP, Temperature
A segment to specify a temperature setting for a goods item.
0250 RNG, Range details
A segment to specify a temperature range setting for a goods item.
0260 SGP, Split goods placement
A segment to identify a container in which goods are transported.
0270 Segment Group 6: DGS-FTX
A group of segments to specify dangerous goods details related to the goods item. One goods item may be in different dangerous goods classes.
0280 DGS, Dangerous goods
A segment to indicate the dangerous goods regulations for the corresponding mode of transport, class of dangerous goods, additional dangerous goods code, UN-number and shipment flash point.
0290 FTX, Free text
A segment to specify supplementary details related to the dangerous goods, such as: - dangerous goods technical name - dangerous goods additional information
0300 Segment Group 7: EQD-RFF-TMD-DTM-LOC-MEA-DIM-SEL-FTX-EQA-SG8-
SG9-NAD A group of segments to specify containers in which goods are
0310 EQD, Equipment details
A segment to specify a container, container size and type used in the transport, and full/empty indication.
0320 RFF, Reference
A segment to specify the identifying number associated with the container, such as: - container sequence number - booking reference number (sea)
0330 TMD, Transport movement details
A segment to indicate a Full Container Load (FCL) or a Less than Full Container Load (LCL).
0340 | DTM, Date/time/period
A segment to indicate date and time relating to the delivery of a container: - actual equipment positioning date and/or time
0350 LOC, Place/location identification
A segment to specify ports/locations associated with the transport of a container, such as: - stowage cell - place of discharge
0360 MEA, Measurements
A segment to specify measurement, other than dimensions, associated with the container, such as: - gross weight
0370 DIM, Dimensions
A segment to specify dimensions applicable to the container, such as: - external equipment dimensions
0380 SEL, Seal number
A segment to identify seal and seal issuer associated with the container, such as shipper, consolidator, carrier (sea), Customs or terminal operator.
0390 FTX, Free text
A segment to specify processable supplementary information associated with the container, such as: - damage remarks
0400 EQA, Attached equipment
A segment to identify related container and means of transport details (rail), such as: - rail car
0410 Segment Group 8: DAM-COD
A group of segments to specify damage details related to the equipment.
0420 DAM, Damage
A segment to specify equipment damages, such as the point of the damage on the equipment, and the type of damage.
0430 COD, Component details
A segment to specify component details of the damaged equipment.
0440 Segment Group 9: TDT-LOC-DTM
A group of segments to indicate details of the movement of containers by sea and by inland carriers, such as mode and means of transport and locations.
0450 TDT, Details of transport
A segment to indicate information related to the inland transport stage (road, rail or inland water), such as mode of transport, identification of the means of transport and inland carrier.
0460 LOC, Place/location identification
A segment to specify ports/locations associated with inland transport of a container, such as: - place of departure - place of arrival
0470 DTM, Date/time/period
A segment to specify a date/time relating to the transport details, such as arrival or departure date/time.
0480 NAD, Name and address
A segment to specify the actual address where a piece of equipment is to be delivered finally (final place of positioning).
0490 CNT, Control total
A segment to specify the number of containers in the message,.
0500 UNT, Message trailer
A service segment ending a message, giving the total number of segments in the message and the control reference number of the message.
4.2. Data segment index (Alphabetical sequence by tag)
| BGM | Beginning of message | |
| CNT | Control total | |
| COD | Component details | |
 |
COM | Communication contact |
| CTA | Contact information | |
| DAM | Damage | |
| DGS | Dangerous goods | |
| DIM | Dimensions | |
| DTM | Date/time/period | |
| EQA | Attached equipment | |
| EQD | Equipment details | |
| FTX | Free text | |
| GID | Goods item details | |
| HAN | Handling instructions | |
| LOC | Place/location identification | |
| MEA | Measurements | |
| NAD | Name and address | |
| PIA | Additional product id | |
| RFF | Reference | |
| RNG | Range details | |
| SEL | Seal number | |
| SGP | Split goods placement | |
| TDT | Details of transport | |
| TMD | Transport movement details | |
| TMP | Temperature | |
| UNH | Message header | |
| UNT | Message trailer |
4.3. Message structure
4.3.1. Segment table
| ├─UNH Message header | ×1 | (M) |
| ├─BGM Beginning of message | ×1 | (M) |
| ├─DTM Date/time/period | ×9 | (C) |
| ├─FTX Free text | ×9 | (C) |
| ├─Segment Group 1 | ×9 | (C) |
| │─├─RFF Reference | ×1 | (M) |
| │─└─DTM Date/time/period | ×9 | (C) |
| ├─Segment Group 2 | ×1 | (C) |
| │─├─TDT Details of transport | ×1 | (M) |
| │─├─RFF Reference | ×9 | (C) |
| │─├─LOC Place/location identification | ×9 | (C) |
| │─└─DTM Date/time/period | ×9 | (C) |
| ├─Segment Group 3 | ×9 | (M) |
| │─├─NAD Name and address | ×1 | (M) |
| │─└─Segment Group 4 | ×9 | (C) |
| │───├─CTA Contact information | ×1 | (M) |
| │───└─COM Communication contact | ×9 | (C) |
| ├─Segment Group 5 | ×999 | (C) |
| │─├─GID Goods item details | ×1 | (M) |
| │─├─HAN Handling instructions | ×9 | (C) |
| │─├─FTX Free text | ×9 | (C) |
| │─├─PIA Additional product id | ×9 | (C) |
| │─├─MEA Measurements | ×9 | (C) |
| │─├─TMP Temperature | ×9 | (C) |
| │─├─RNG Range details | ×9 | (C) |
| │─├─SGP Split goods placement | ×999 | (C) |
| │─└─Segment Group 6 | ×9 | (C) |
| │───├─DGS Dangerous goods | ×1 | (M) |
| │───└─FTX Free text | ×9 | (C) |
| ├─Segment Group 7 | ×999 | (M) |
| │─├─EQD Equipment details | ×1 | (M) |
| │─├─RFF Reference | ×9 | (C) |
| │─├─TMD Transport movement details | ×9 | (C) |
| │─├─DTM Date/time/period | ×9 | (C) |
| │─├─LOC Place/location identification | ×9 | (C) |
| │─├─MEA Measurements | ×9 | (C) |
| │─├─DIM Dimensions | ×9 | (C) |
| │─├─SEL Seal number | ×9 | (C) |
| │─├─FTX Free text | ×9 | (C) |
| │─├─EQA Attached equipment | ×9 | (C) |
| │─├─Segment Group 8 | ×9 | (C) |
| │─│─├─DAM Damage | ×1 | (M) |
| │─│─└─COD Component details | ×1 | (C) |
| │─├─Segment Group 9 | ×9 | (C) |
| │─│─├─TDT Details of transport | ×1 | (M) |
| │─│─├─LOC Place/location identification | ×1 | (C) |
| │─│─└─DTM Date/time/period | ×1 | (C) |
| │─└─NAD Name and address | ×9 | (C) |
| ├─CNT Control total | ×1 | (M) |
| └─UNT Message trailer | ×1 | (M) |
Return to EDIFACT D96B Messages page.