0. INTRODUCTION
1. SCOPE
   1. Functional definition
   2. Field of application
   3. Principles
2. REFERENCES
3. TERMS AND DEFINITIONS
4. MESSAGE DEFINITION
   1. Data segment clarification
   2. Data segment index (alphabetical sequence)
   3. Message structure
      1. Segment table
5. ANNEX

This specification provides the definition of the Booking confirmation message (IFTMBC) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport.

This paper provides the definition of the Booking Confirmation Message to be used in fulfilling the requirements of trading partners in the transport chain worldwide, in the interchange of cargo and transport related information using Electronic Data Interchange (EDI).

This message is a single consignment based message, being aligned with other single consignment based messages such as the other two booking messages (IFTMBP and IFTMBF), the instruction messages (IFTMIN and IFTMCS) and the Arrival Notice Message (IFTMAN). The single consignment based messages can be used by all modes of transport for the forwarding and transport of goods from any origin to any destination, regardless of route or prevailing commercial practice. These messages are suitable for the arrangement of the transport of goods between all parties to the movement of the consignment (including the consignor/shipper and consignee as well as the forwarders, brokers, and carriers involved) as well as providing the information necessary to perform that transport and delivery of the goods. They should be used in the same way by each mode of transport when the requirements are common even if functionally similar information is known by different names.

A message from the party providing forwarding and/or transport services to the party booking those services giving the confirmation information to the booking of the consignment concerned. A confirmation might read that the booking of a consignment is accepted, pending, conditionally accepted or rejected.

The conditions under which requested services take place may be given in this message.

This message may be applied for both national and international trade. It is based on universal practice and is not dependent on the type of business or industry.

The message can be used whenever a confirmation of the booking of a consignment is deemed necessary as an answer to a booking provisional or booking firm message concerning a certain consignment.

The use of a Booking Confirmation Message is not compulsory.

• A consignment may contain several goods items.
• Goods items may or may not be containerized.
• A goods item may be transported in one or more containers, and a single container may contain one or more goods items.
• One goods item may be related to one or more customs tariff codes.
• Goods items related to one customs tariff code may be carried in one or more containers.
• Goods items may reflect either the contractual or operational description of the goods.
• A party to the movement of the consignment may book or order transport for one or more goods items.
• A party to the movement of the consignment may book or issue instructions of transport to be arranged for several goods items by means of one or several of the following messages: IFTMBP, IFTMBF, IFTMBC, IFTMIN, IFTMCS, IFTMAN.
• Pre-carriage (advanced haulage) and/or on-carriage (destination haulage) of goods items or equipment within one booking or instruction may take place in different steps, each step specified with its own transport details group.
• Equipment may have other types of equipment attached to it, e.g. a temperature control unit attached to a container.
• Equipment and/or goods items may be attached to or transported on another load or transport device, which as such may be attached to or transported on yet another load or transport device, e.g. a container on a chassis on a rail-car.
• Transport devices, which have the ability of powered movement on their own, are specified in the transport details group. Other load or transport devices are specified as equipment.
• The expression of packaging for goods items can be expressed at up to three levels.

A number of generic transport terms are used in this specification, to be described as:

• MODE OF TRANSPORT: The method of transport used for the conveyance of goods or persons, e.g. by rail, by road, by sea.
• MEANS OF TRANSPORT: The vehicle used for the transport of goods or persons, e.g. aircraft, truck, vessel.
• TYPE OF MEANS OF TRANSPORT: The type of vehicle used in the transport process, e.g. wide body, tank truck, passenger vessel.
• EQUIPMENT: Material resources necessary to facilitate the transport and handling of cargo. Transport equipment does under the given circumstances not have the ability to move by its own propulsion (e.g. sea container, trailer, unit load device, pallet).
• TYPE OF EQUIPMENT: The type of material used, e.g. 40 feet container, four any pallet, mafi trailer.

See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 1.

See UNTDID, Part 4, Chapter 2.6 UN/ECE UNSM - General Introduction, Section 2.

This section should be read in conjunction with the Branching Diagram and the Segment Table which indicate mandatory, conditional and repeating requirements.

0010 | UNH, Message header

A service segment starting and uniquely identifying a message. The message type code for the Booking confirmation message is IFTMBC.

Note: Booking confirmation messages conforming to this document must contain the following data in segment UNH, composite S009:

0020 BGM, Beginning of message

A segment to indicate the beginning of a message and to transmit identifying number and type of the message.

0030 CTA, Contact information

A segment to identify a person or department to whom communication should be directed.

0040 COM, Communication contact

A segment to identify a communication number of a person or department to whom communication should be directed.

0050 DTM, Date/time/period

A segment to indicate a date and time applying to the whole message, e.g., date and time of document issue.

0060 TSR, Transport service requirements

A segment to provide confirmation details of the required transport services.

0070 FTX, Free text

A segment to specify free form or processable supplementary information, such as status of transport, remarks to be printed on the transport documents (where required), consignment remarks, insurance instructions, etc., or any other additional information.

0080 CNT, Control total

A segment to specify totals for a consignment.

0090 Segment Group 1: LOC-DTM

A group of segments to specify locations and related date(s)/time(s) which apply to the entire message, e.g. place of transhipment.

0100 LOC, Place/location identification

A segment to identify a location applying to the entire message.

0110 DTM, Date/time/period

A segment to indicate date(s) and time(s) relating to the location.

0120 Segment Group 2: RFF-DTM

A group of segments containing a reference and constants which apply to the entire message.

0130 RFF, Reference

A segment to express a reference which applies to the entire message such as: the document/message number that is to be updated by this very message (according to data element 1225 Message Function, Coded in segment BGM), booking reference, order number, insurance contract, etc.

0140 DTM, Date/time/period

A segment to indicate date and time relating to the reference.

0150 TCC, Transport charge/rate calculations

A segment to provide information on the charges associated with the transport.

0160 Segment Group 3: TDT-DTM-TSR-SG4-SG5

A group of segments to indicate details of the movement of goods such as mode and means of transport, locations, departure, and arrival date(s) and time(s).

0170 TDT, Details of transport

A segment to indicate information related to a certain stage of the transport, such as mode, means and carrier.

0180 DTM, Date/time/period

A segment to indicate departure/arrival date and time.

0190 TSR, Transport service requirements

A segment to identify contract, conditions of carriage, services, priority requirements for this stage of transport.

0200 Segment Group 4: LOC-DTM

A group of segments to specify a location and date/time related to this leg of transport.

0210 LOC, Place/location identification

A segment to indicate a location such as origin, destination, stop off, etc. related to this leg of transport.

0220 DTM, Date/time/period

A segment to specify a date/time related to the location, such as arrival date/time of a means of transport at a specific location.

0230 Segment Group 5: RFF-DTM

A group of segments to specify an additional reference related to the stage of the transport.

0240 RFF, Reference

A segment to specify the additional reference.

0250 DTM, Date/time/period

A segment to identify date and time relating to the reference.

0260 Segment Group 6: NAD-LOC-SG7

A group of segments to identify a party, related references, locations contacts, required documents, and charges to be paid by the party.

0270 NAD, Name and address

A segment to identify the party's name, address, and function.

0280 LOC, Place/location identification

A segment to indicate location where a specific function will be performed.

0290 Segment Group 7: TSR-RFF-LOC-TPL-FTX

A group of segments to specify a transport service requirement and its associated details (such as applicable commercial agreement) related to the party.

0300 TSR, Transport service requirements

A segment to specify a required service for the transport, such as re-icing.

0310 RFF, Reference

A segment to identify a commercial agreement related to the service requirement.

0320 LOC, Place/location identification

A segment to indicate the location where the required service must be performed, such as place of re-icing.

0330 TPL, Transport placement

A segment to identify the means of transport to which the service requirement applies.

0340 FTX, Free text

A segment to provide any additional information related to the service requirement.

0350 Segment Group 8: GID-HAN-TMP-RNG-TMD-LOC-FTX-SG9-GDS-SG10-SG11-

SG12-SG13-SG14 A group of segments to describe the goods items for which transport is undertaken.

0360 GID, Goods item details

A segment to identify a goods item for which transport is undertaken. A goods item can be identified by up to three levels of packaging.

0370 HAN, Handling instructions

A segment to specify handling instructions relating to the goods item.

0380 TMP, Temperature

A segment to specify a temperature setting for a goods item.

0390 RNG, Range details

A segment to specify a temperature range setting for a goods item.

0400 TMD, Transport movement details

A segment to specify transport movement details for a goods item.

0410 LOC, Place/location identification

A segment to specify a country associated with a goods item, such as country of origin, or country of destination.

0420 FTX, Free text

A segment to specify processable supplementary information relating to the goods item.

0430 Segment Group 9: NAD-DTM

A group of segments to identify different places of collection and/or delivery for the goods item.

0440 NAD, Name and address

A segment to specify an address of a place of collection or delivery for a goods item.

0450 DTM, Date/time/period

A segment to indicate date and time relating to the place of collection or delivery.

0460 GDS, Nature of cargo

A segment to describe the nature of cargo.

0470 Segment Group 10: MEA-EQN

A group of segments to specify measurements applicable to a goods item.

0480 MEA, Measurements

A segment to specify measurements, other than dimensions, applicable to a goods item.

0490 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

0500 Segment Group 11: DIM-EQN

A group of segments to specify dimensions applicable to a goods item.

0510 DIM, Dimensions

A segment to specify dimensions applicable to a goods item.

0520 EQN, Number of units

A segment to specify the number of equipment units to each of which the given dimension applies.

0530 Segment Group 12: RFF-DTM

A group of segments to identify references to a goods item.

0540 RFF, Reference

A segment to identify a reference to a goods item.

0550 DTM, Date/time/period

A segment to indicate date and time relating to the reference.

0560 Segment Group 13: DOC-DTM

A group of segments to specify documents and associated date(s) and time(s) for a goods item.

0570 DOC, Document/message details

A segment to specify a document prepared for a goods item.

0580 DTM, Date/time/period

A segment to associate date and time with the prepared document.

0590 Segment Group 14: DGS-FTX-SG15

A group of segments to specify dangerous goods details related to the goods item. One goods item may be in different dangerous goods classes.

0600 DGS, Dangerous goods

A segment to indicate the class of dangerous goods, packing group, etc.

0610 FTX, Free text

A segment to specify the dangerous goods technical name and to specify any additional dangerous goods information.

0620 Segment Group 15: MEA-EQN

A group of segments to identify dangerous goods measurements.

0630 MEA, Measurements

A segment to specify measurements of the dangerous goods.

0640 EQN, Number of units

A segment to specify the number of equipment units to each of which the given measurement applies.

0650 Segment Group 16: EQD-EQN-TMD-MEA-DIM-HAN-TMP-FTX-SG17

A group of segments to specify equipment in which goods are transported.

0660 EQD, Equipment details

A segment to specify equipment, and equipment size and type used in the transport.

0670 EQN, Number of units

A segment to specify number of pieces of equipment required.

0680 TMD, Transport movement details

A segment to specify transport movement details for the equipment.

0690 MEA, Measurements

A segment to specify measurements, other than dimensions, associated with the equipment, such as weight.

0700 DIM, Dimensions

A segment to specify dimensions applicable to equipment.

0710 HAN, Handling instructions

A segment to specify handling instructions for specified equipment.

0720 TMP, Temperature

A segment to specify a temperature setting for the equipment.

0730 FTX, Free text

A segment to specify processable supplementary information associated with the equipment.

0740 Segment Group 17: NAD-DTM

A group of segments to identify different equipment pick-up or drop-off places.

0750 NAD, Name and address

A segment to specify a pick-up or drop-off address.

0760 DTM, Date/time/period

A segment to indicate date and time relating to pick-up or drop-off.

0770 UNT, Message trailer

A service segment ending a message, giving the total number of segments in the message and the control reference number of the message.

1. TDT+20+HL12345+1:MARITIME+:CONTAINER VESSEL+:::HAPAG LLOYD+++PHXXX:::FAITHFUL' Notes: 20 indicates 'main transport' (d.e. 8051); HL12345 is assigned by the carrier (d.e. 8028; is the 'flight number' in the air mode); PHXXX is the radio call sign (d.e. 8213); 'FAITHFUL' is the name of the vessel

2. TDT+20+91/05/0021+3:ROAD++:::INT. TRUCKING CO.+++BB-10-XX::::NL' Note: BB-10-XX represents the (Dutch) truck registration no.