Return to EDIFACT D93A Messages page.
UN/EDIFACT
DRAFT RECOMMENDATION
DELIVERY SCHEDULE MESSAGE
|
This message is available for formal trial in the present version for a period of at least twelve months from the date of approval by the UN/ECE/TRADE/WP.4.
Organisations are invited to trial this message and are requested to notify their Rapporteur Team Secretariat of their intention. Comments on the results from the trial should also be forwarded to the Secretariat as soon as they are available. Based on the results of the trials, a UNSM will be issued.
It should be noted that this material is contained in a Trial Directory; however, it may differ from that in the UN Directories (UNTDID) having the same identfying tags. Any differences will be reconciled prior to the message becoming a UNSM.
|
| Message Type: | DELFOR |
|---|
| Version: | D |
|---|
| Release: | 93A |
|---|
| Contr. Agency: | UN |
|---|
| Status: | 2 |
|---|
| Date: | 93-07 |
|---|
| SOURCE: | Submitted by WEEB-MD1 on behalf of PAEB |
|---|
CONTENTS
DELIVERY SCHEDULE MESSAGE MESSAGE
- Introduction
- Scope
- Functional Definition
- Field of Application
- Principles
- References
- Message Definition
- Message Definition
- Data Segment Clarification
- Message structure
- Branching Diagram
- Segment Table
- Data Segment Index (Alphabetic Sequence)
|
For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.5, UN/ECE UNSM General Introduction.
|
This message also occurs in the following versions of this standard:
D93A, D94A, D94B, D95A, D95B, D96A, D96B, D97A, D97B, D98A, D98B, D99A, D99B, D00A, D00B, D01A, D01B, D01C, D02A, D02B, D03A, D03B, D04A, D04B |
0. Introduction
This specification provides the definition of the Delivery Schedule Message (DELFOR) to be used in Electronic Data Interchange (EDI) between partners involved in administration, commerce and transportation.
1. Scope
This paper provides the definition of the United Nations Standard Delivery Schedule message to be used in Electronic Data Interchange (EDI) between trading partners.
1.1. Functional Definition
A message from buyer to supplier giving product requirements regarding details for short term delivery instructions and/or medium to long term product/service forecast for planning purposes according to conditions set out in a contract or order. The message can be used to authorize the commitment of labour and materials resources.
1.2. Field of Application
The UN Standard Delivery Schedule Message may be applied for both national and international trade. It is based on universal commercial practice and is not dependent on the type of business or industry.
1.3. Principles
- specify delivery schedules requested by the buyer
- define the aspects that guarantee a perfect synchronization between buyer and seller
- provide information allowing the seller to plan for future requirements in order to purchase raw materials to produce and deliver goods in the most economical way.
2. References
See UNTDID, Part 4 Section 2.5 UN/ECE UNSM - General Introduction, Section 1.
3. Terms and Definitions
See UNTDID, Part 4, Section 2.5 UN/ECE UNSM - General Introduction, Section 2.
4. Message Definition
4.1. Data Segment Clarification
This section should be read in conjunction with the Branching Diagram and the Segment Table which indicate mandatory, conditional and repeating requirements.
0010 UNH, Message header
A service segment starting and uniquely identifying a message. The message type code for the UN Delivery Schedule Message is 'DELFOR'. Note: Delivery Schedule Messages conforming to this document must contain the following data in UNH, composite S009: Data element 0065 DELFOR 0052 D 0054 93A 0051 UN 0020 BGM, Beginning of message
Segment groups assumes that the other group will not be used. There are two methods of conveying Product Delivery forecast information. First method is by delivery point (Segment groups 4-17), the second is product driven (Segment group 18-31). 0030 DTM, Date/time/period
A segment specifying the date, and when relevant, the time/period of the beginning and ending of the validity period of the document. The DTM must be specified at least once to identify the Delivery Schedule document date. The date/time/period segment within other Segment group should be used whenever the date/time/period is logically related to another specified data item. 0040 Segment Group 1: RFF-DTMA group of segments giving references relevant to the whole message, e.g. contract number. 0050 RFF, Reference
A segment for referencing documents relating to the whole Delivery Schedule Message, e.g. contract, import/export license. 0060 DTM, Date/time/period
Date/time/period from the referred document. 0070 Segment Group 2: NAD-LOC-SG3A group of segments identifying names, addresses, locations, and contacts relevant to the whole Delivery Schedule. 0080 NAD, Name and address
A segment for identifying names and addresses and their functions relevant for the whole Delivery Schedule. Identification of the seller and buyer parties is recommended for the Delivery Schedule message. Exception: the identification of the recipient of the goods must be given in the NAD segment in the detail section when required. It is recommended that where possible only the coded form of the party ID should be specified, e.g. the buyer and seller are known to each other, thus only the coded ID is required. The consignee or delivery address may vary and would have to be clearly specified, preferably in structured format. 0090 LOC, Place/location identification
A segment indicating more details regarding specific place/locations related to the party specified in the NAD segment, e.g. internal site/building number. 0100 Segment Group 3: CTA-COMA group of segments to identify people, functions, or departments and appropriate numbers to whom communication should be directed. 0110 CTA, Contact information
A segment to identify the person, function, or department to whom communication should be directed. 0120 COM, Communication contact
A segment identifying communication types and numbers for the person, function, or department identified in the CTA. UNS, Section control A service segment placed at the start of the detail section to avoid segment collision. The detail section consists of two main Segment groups: Segment group 4 and Segment group 18. The use of one of the Segment groups assumes that the other group will not be used. There are two methods of conveying Product Delivery forecast information. First method is by delivery point (Segment groups 4-17), the second is product driven (Segment group 18-31). A group containing delivery names and addresses, related information and details of line items to be consigned to the delivery points. 0140 NAD, Name and address
A segment for identifying names and addresses and their functions relevant to the delivery point. 0150 LOC, Place/location identification
A segment identifying a specific location to which product, as specified in the LIN-Segment groups, should be delivered. 0160 FTX, Free text
A segment with free text in coded or clear form to give further clarification when required. In computer to computer exchanges such text will normally require the receiver to process this segment manually. 0170 Segment Group 5: DOC-DTMA group of segments providing information relating to documents required for the delivery point. 0180 DOC, Document/message details
A segment providing information relating to the documents required for the specified delivery point. 0190 DTM, Date/time/period
Date/time of documents required. 0200 Segment Group 6: CTA-COMA group of segments to identify a person or department and appropriate numbers to whom communication should be directed. 0210 CTA, Contact information
A segment to identify the person, function, or department to whom communication should be directed. 0220 COM, Communication contact
Identify communication types and numbers for the person, function, or department identified in CTA. 0230 Segment Group 7: TDT-DTMA group of segments specifying details of the mode and means of transport, and date/time of departure and destination relating to specified delivery point. 0240 TDT, Details of transport
A segment specifying the carriage, and the mode and means of transport of the goods for the specified transport. 0250 DTM, Date/time/period
A segment indicating the date/time/period details of departure and/or arrival relating to the TDT segment. A group of segments providing details of the individual line items for the specified delivery point. 0270 LIN, Line item
A segment identifying the details of the product or service to be delivered, e.g. product identification. All other segments in the detail section following the LIN segment refer to the line item. 0280 PIA, Additional product id
A segment providing additional product identification. 0290 IMD, Item description
A segment for describing the product or the service to be delivered. This segment should be used for products that cannot be identified by a product code or article number. 0300 MEA, Measurements
A segment specifying physical measurements of the item to be delivered in original or unpacked form. 0310 ALI, Additional information
A segment indicating that the line item is subject to special conditions due to origin, customs preference, or commercial factors. 0320 GIN, Goods identity number
A segment providing identity numbers to be applied to the goods to be delivered, e.g. serial numbers for assembled equipment. 0330 GIR, Related identification numbers
A segment providing sets of related identification numbers for a line item, e.g. engine number, chassis number and transmission number for a vehicle. 0340 LOC, Place/location identification
A segment identifying a specific location to which products, as specified in the LIN-Segment group, should be delivered. 0350 DTM, Date/time/period
Date/time/period associated with the line item. 0360 FTX, Free text
A segment with free text in coded or clear form to give further clarification, when required, to the line item to be delivered. In computer to computer exchanges such text will normally require the receiver to process this segment manually. 0370 Segment Group 9: CTA-COMA group of segments to identify the person, function or a department and appropriate numbers to whom communication should be directed. 0380 CTA, Contact information
A segment to identify the person, function, department to whom communication should be directed. 0390 COM, Communication contact
Identify communication types and numbers for the person, function, or department identified in the CTA. 0400 Segment Group 10: RFF-DTMA group of segments giving references related to the line item and where necessary, their dates. 0410 RFF, Reference
A segment for identifying documents relating to the line item, e.g. a contract and its appropriate line item. 0420 DTM, Date/time/period
Date/time of the referred document. 0430 Segment Group 11: TDT-DTMA group of segments specifying details of the mode and means of transport, and date/time of departure and destination relating to the specified location. 0440 TDT, Details of transport
A segment specifying the carriage, and the mode and means of transport of the goods for the specified location. 0450 DTM, Date/time/period
A segment indicating the date/time/period details of departure and/or arrival relating to the TDT segment. A group of segments specifying quantity related information for actual delivery, reporting or cumulative quantities and forecast quantities as required for the line item. 0470 QTY, Quantity
A segment to specify pertinent quantities which may be relating to schedule(s) and/or pattern established in the SCC/DTM segment, e.g. delivery quantity or a specified date. 0480 SCC, Scheduling conditions
A segment specifying the type and status of the schedule being given, and optionally defining a pattern to be established, e.g. firm or proposed delivery schedule for a weekly pattern. 0490 DTM, Date/time/period
A segment indicating the date/time/period details relating to the quantity and schedule details in the QTY/SCC segments. This segment may indicate date/time ranges, e.g. start and end dates for a delivery pattern, or delivery window. 0500 Segment Group 13: RFF-DTMA group of segments for referencing specific product delivery release information and where necessary their date. 0510 RFF, Reference
A segment for referencing specific product delivery release information e.g. appointment. 0520 DTM, Date/time/period
Date/time of the referred document. A group of segments identifying the packaging, physical dimensions, and marks and numbers for goods referenced in the line item to be delivered. 0540 PAC, Package
A segment specifying the number of package units and the physical type of packaging for the line item, e.g. pallet. 0550 MEA, Measurements
A segment specifying physical measurements of packages described in the PAC segment, e.g. pallet dimensions. 0560 QTY, Quantity
A segment to specify pertinent quantities relating to the physical units (packages) described in the PAC segment. 0570 DTM, Date/time/period
A segment specifying date/time/period details relating to the physical units (packages) described in the PAC segment, e.g. packaging date. 0580 Segment Group 15: PCI-GINA group of segments identifying markings and labels and if relevant package numbers. 0590 PCI, Package identification
A segment specifying markings and labels used on individual physical units (packages) described in the PAC segment. 0600 GIN, Goods identity number
A segment providing identity numbers to be applied to the packages to be delivered. 0610 Segment Group 16: QVA-DTM-SG17A group of segments specifying details regarding quantity variations relevant to the line item to be delivered. 0620 QVA, Quantity variances
A segment specifying details relating to variations between ordered/notified and shipped/received quantities. 0630 DTM, Date/time/period
A segment specifying the date/time/period related to the variance specified in QVA segment. 0640 Segment Group 17: RFF-DTMA group of segments for referencing quantity variance information. 0650 RFF, Reference
A segment for referencing documents relating to the variance specified in QVA segment, e.g. previous delivery schedule, previous despatch advice. 0660 DTM, Date/time/period
Date/time of the referred document. The detail section consists of two main Segment groups, Segment group 4 and Segment group 18. The use of Segment group 18 assumes that Segment group 4 has not been used. A group of that contains a line item and its related information and details of delivery names and addresses for each delivery location to which goods from the line items should be consigned. 0680 LIN, Line item
A segment identifying the details of the product or service to be delivered, e.g. product identification. All other segments in the detail section following the LIN segment refer to the line item. 0690 PIA, Additional product id
A segment providing additional product identification to the line item. 0700 IMD, Item description
A segment for describing the product or the service to be delivered. This segment should be used for products that cannot be identified by a product code or article number. 0710 MEA, Measurements
A segment specifying physical measurements of the item to be delivered in original or unpacked form. 0720 ALI, Additional information
A segment indicating that the line item is subject to special conditions due to origin, customs preference, or commercial factors. 0730 GIN, Goods identity number
A segment providing identity numbers to be applied to the goods to be delivered, e.g. serial numbers for assembled equipment. 0740 GIR, Related identification numbers
A segment providing sets of related identification numbers for a line item, e.g. engine number, chassis number and transmission number for a vehicle. 0750 DTM, Date/time/period
Date/time/period associated with the line item. 0760 FTX, Free text
A segment with free text in coded or clear form to give further clarification, when required, to the line item to be delivered. In computer to computer exchanges such text will normally require the receiver to process this segment manually. 0770 Segment Group 19: RFF-DTMA group of segment giving references related to the line item and where necessary, their dates. 0780 RFF, Reference
A segment for referencing documents relating to the line item, e.g. a contract and its appropriate line item. 0790 DTM, Date/time/period
Date/time/period associated with the referred document. A group of segments specifying quantity related information for actual delivery, reporting or cumulative quantities and forecast quantities as required for the line item. 0810 QTY, Quantity
A segment to specify pertinent quantities which may be relating to the schedule(s) and/or pattern established in the SCC/DTM segment, e.g. delivery quantity on a specified date. 0820 SCC, Scheduling conditions
A segment specifying the type and status of the schedule being given, and optionally defining a pattern to be established, e.g. firm or proposed delivery schedule for a weekly pattern. 0830 DTM, Date/time/period
A segment indicating the date/time/period details relating to the quantity and schedule detail sin the QTY/SCC segments. This segment may indicate date/time ranges, e.g. start and end dates for a delivery pattern, or delivery window. 0840 Segment Group 21: RFF-DTMA group of segment for referencing specific product delivery release information and where necessary their date. 0850 RFF, Reference
A segment for referencing specific product delivery release information, e.g. appointment. 0860 DTM, Date/time/period
Date/time of the referred document. A group of segments identifying the packaging, physical dimensions, and marks and numbers for goods referenced in the line item to be delivered. 0880 PAC, Package
A segment specifying the number of package units and the physical type of packaging for the line item, e.g. pallet. 0890 MEA, Measurements
A segment specifying physical measurements of packages described in the PAC segment, e.g. pallet dimensions. 0900 QTY, Quantity
A segment to specify pertinent quantities relating to the physical units (packages) described in the PAC segment. 0910 DTM, Date/time/period
A segment specifying the date/time/period details relating to the physical units (packages) described in the PAC segment, e.g. package validity date. 0920 Segment Group 23: PCI-GINA segment identifying markings and labels and ,if relevant, package numbers. 0930 PCI, Package identification
A segment specifying markings and labels used on individual physical units (packages) described in the PAC segment. 0940 GIN, Goods identity number
A segment providing identity numbers to be applied to the packages to be delivered. A group of segments providing details of the individual delivery points. 0960 NAD, Name and address
A segment for identifying names and addresses and their functions relevant to the delivery point. Exception: the identification of the recipient of the goods must be given in the NAD segment in the detail section when required. It is recommended that where possible only the coded form of the party ID should be specified, e.g. the buyer and seller are known to each other, thus only the coded ID is required. The consignee or delivery address may vary and would have to be clearly specified, preferably in structured format. All other segments in this Segment group 24 following the NAD segment refer to that delivery point. 0970 LOC, Place/location identification
A segment identifying a specific location to which products, as specified in the LIN-Segment groups, should be delivered. 0980 FTX, Free text
A segment with free text in coded or clear form to give further clarification when required. In computer to computer exchanges such text will normally require the receiver to process this segment manually. 0990 Segment Group 25: DOC-DTMA group of segment providing information relating to documents required for the delivery point. 1000 DOC, Document/message details
A segment providing information relating to the documents required for the specified delivery point. 1010 DTM, Date/time/period
Date/time of documents required. 1020 Segment Group 26: CTA-COMA group of segments to identify a person or a department and appropriate numbers to whom communication should be directed. 1030 CTA, Contact information
A segment to identify the person, function, or department to whom communication should be directed. 1040 COM, Communication contact
Identify communication types and numbers for the person, function, or department identified in CTA. A group of segments specifying quantity related information for actual delivery, reporting or cumulative quantities and forecast quantities as required for the delivery point. 1060 QTY, Quantity
A segment to specify pertinent quantities which may be relating to the schedule(s) and/or pattern established in the SCC/DTM segment, e.g. delivery quantity on a specified date. 1070 SCC, Scheduling conditions
A segment specifying the type and status of the schedule being given, and optionally defining a pattern to be established, e.g. firm or proposed delivery schedule for a weekly pattern. 1080 DTM, Date/time/period
A segment indicating the date/time details relating to the quantity and schedule details in the QTY/SCC segments. This segment may indicate date/time ranges, e.g. start and end dates for a delivery pattern, or delivery window. 1090 Segment Group 28: RFF-DTMA group of segment for referencing specific product delivery release information and, where necessary, their dates. 1100 RFF, Reference
A segment for referencing specific product delivery release information e.g. appointment. 1110 DTM, Date/time/period
Date/time of the referred document. 1120 Segment Group 29: QVA-DTM-SG30A group of segments specifying details regarding quantity variations relevant to the line item and delivery point to be delivered. 1130 QVA, Quantity variances
A segment specifying details relating to variations between ordered/notified or shipped/received quantities, or to provide information on the latest received quantities. 1140 DTM, Date/time/period
A segment specifying the date/time/period related to the variance specified in QVA segment. 1150 Segment Group 30: RFF-DTMA group of segments for referencing quantity variance information. 1160 RFF, Reference
A segment for referencing documents relating to the variance specified in QVA segment, e.g. previous delivery schedule, previous despatch advice. 1170 DTM, Date/time/period
Date/time of the referred document. 1180 Segment Group 31: TDT-DTMA group of segments specifying details of the mode and means of transport, and date/time of departure and destination relating to the specified location. 1190 TDT, Details of transport
A segment specifying the carriage, and the mode and means of transport of the goods for the specified location. 1200 DTM, Date/time/period
A segment indicating the date/time/period details of departure and/or arrival relating to the TDT segment. UNS, Section control A service segment placed at the start of the summary section to avoid segment collision. 1210 CNT, Control total
A segment by which control totals may be provided by sender for checking by the receiver. 1220 FTX, Free text
A segment with free text in coded or clear form to give further clarification when required. In computer to computer exchanges such text will normally require the receiver to process this segment manually. 1230 UNT, Message trailer
A service segment ending a message, giving the total number of segments in the message and the Control reference number of the message.
4.2. Message Structure
4.2.1. Branching Diagram
4.2.2. Segment Table
| ├─UNH Message header | ×1 | (M) |
| ├─BGM Beginning of message | ×1 | (M) |
| ├─DTM Date/time/period | ×10 | (M) |
| ├─Segment Group 1 | ×10 | (C) |
| │─├─RFF Reference | ×1 | (M) |
| │─└─DTM Date/time/period | ×1 | (C) |
| ├─Segment Group 2 | ×20 | (C) |
| │─├─NAD Name and address | ×1 | (M) |
| │─├─LOC Place/location identification | ×10 | (C) |
| │─└─Segment Group 3 | ×5 | (C) |
| │───├─CTA Contact information | ×1 | (M) |
| │───└─COM Communication contact | ×5 | (C) |
| ├─UNS Section control | ×1 | (M) |
| ├─Segment Group 4 | ×500 | (C) |
| │─├─NAD Name and address | ×1 | (M) |
| │─├─LOC Place/location identification | ×10 | (C) |
| │─├─FTX Free text | ×5 | (C) |
| │─├─Segment Group 5 | ×10 | (C) |
| │─│─├─DOC Document/message details | ×1 | (M) |
| │─│─└─DTM Date/time/period | ×10 | (C) |
| │─├─Segment Group 6 | ×5 | (C) |
| │─│─├─CTA Contact information | ×1 | (M) |
| │─│─└─COM Communication contact | ×5 | (C) |
| │─├─Segment Group 7 | ×10 | (C) |
| │─│─├─TDT Details of transport | ×1 | (M) |
| │─│─└─DTM Date/time/period | ×5 | (C) |
| │─└─Segment Group 8 | ×9999 | (C) |
| │───├─LIN Line item | ×1 | (M) |
| │───├─PIA Additional product id | ×10 | (C) |
| │───├─IMD Item description | ×10 | (C) |
| │───├─MEA Measurements | ×5 | (C) |
| │───├─ALI Additional information | ×5 | (C) |
| │───├─GIN Goods identity number | ×100 | (C) |
| │───├─GIR Related identification numbers | ×100 | (C) |
| │───├─LOC Place/location identification | ×100 | (C) |
| │───├─DTM Date/time/period | ×5 | (C) |
| │───├─FTX Free text | ×5 | (C) |
| │───├─Segment Group 9 | ×5 | (C) |
| │───│─├─CTA Contact information | ×1 | (M) |
| │───│─└─COM Communication contact | ×5 | (C) |
| │───├─Segment Group 10 | ×10 | (C) |
| │───│─├─RFF Reference | ×1 | (M) |
| │───│─└─DTM Date/time/period | ×1 | (C) |
| │───├─Segment Group 11 | ×10 | (C) |
| │───│─├─TDT Details of transport | ×1 | (M) |
| │───│─└─DTM Date/time/period | ×5 | (C) |
| │───├─Segment Group 12 | ×200 | (C) |
| │───│─├─QTY Quantity | ×1 | (M) |
| │───│─├─SCC Scheduling conditions | ×1 | (C) |
| │───│─├─DTM Date/time/period | ×2 | (C) |
| │───│─└─Segment Group 13 | ×10 | (C) |
| │───│───├─RFF Reference | ×1 | (M) |
| │───│───└─DTM Date/time/period | ×1 | (C) |
| │───└─Segment Group 14 | ×50 | (C) |
| │─────├─PAC Package | ×1 | (M) |
| │─────├─MEA Measurements | ×10 | (C) |
| │─────├─QTY Quantity | ×5 | (C) |
| │─────├─DTM Date/time/period | ×5 | (C) |
| │─────├─Segment Group 15 | ×10 | (C) |
| │─────│─├─PCI Package identification | ×1 | (M) |
| │─────│─└─GIN Goods identity number | ×10 | (C) |
| │─────└─Segment Group 16 | ×10 | (C) |
| │───────├─QVA Quantity variances | ×1 | (M) |
| │───────├─DTM Date/time/period | ×5 | (C) |
| │───────└─Segment Group 17 | ×10 | (C) |
| │─────────├─RFF Reference | ×1 | (M) |
| │─────────└─DTM Date/time/period | ×1 | (C) |
| ├─Segment Group 18 | ×9999 | (C) |
| │─├─LIN Line item | ×1 | (M) |
| │─├─PIA Additional product id | ×10 | (C) |
| │─├─IMD Item description | ×10 | (C) |
| │─├─MEA Measurements | ×5 | (C) |
| │─├─ALI Additional information | ×5 | (C) |
| │─├─GIN Goods identity number | ×100 | (C) |
| │─├─GIR Related identification numbers | ×100 | (C) |
| │─├─DTM Date/time/period | ×5 | (C) |
| │─├─FTX Free text | ×5 | (C) |
| │─├─Segment Group 19 | ×10 | (C) |
| │─│─├─RFF Reference | ×1 | (M) |
| │─│─└─DTM Date/time/period | ×1 | (C) |
| │─├─Segment Group 20 | ×50 | (C) |
| │─│─├─QTY Quantity | ×1 | (M) |
| │─│─├─SCC Scheduling conditions | ×1 | (C) |
| │─│─├─DTM Date/time/period | ×2 | (C) |
| │─│─└─Segment Group 21 | ×10 | (C) |
| │─│───├─RFF Reference | ×1 | (M) |
| │─│───└─DTM Date/time/period | ×1 | (C) |
| │─├─Segment Group 22 | ×10 | (C) |
| │─│─├─PAC Package | ×1 | (M) |
| │─│─├─MEA Measurements | ×10 | (C) |
| │─│─├─QTY Quantity | ×5 | (C) |
| │─│─├─DTM Date/time/period | ×5 | (C) |
| │─│─└─Segment Group 23 | ×10 | (C) |
| │─│───├─PCI Package identification | ×1 | (M) |
| │─│───└─GIN Goods identity number | ×10 | (C) |
| │─└─Segment Group 24 | ×500 | (C) |
| │───├─NAD Name and address | ×1 | (M) |
| │───├─LOC Place/location identification | ×10 | (C) |
| │───├─FTX Free text | ×5 | (C) |
| │───├─Segment Group 25 | ×10 | (C) |
| │───│─├─DOC Document/message details | ×1 | (M) |
| │───│─└─DTM Date/time/period | ×1 | (C) |
| │───├─Segment Group 26 | ×5 | (C) |
| │───│─├─CTA Contact information | ×1 | (M) |
| │───│─└─COM Communication contact | ×5 | (C) |
| │───├─Segment Group 27 | ×50 | (C) |
| │───│─├─QTY Quantity | ×1 | (M) |
| │───│─├─SCC Scheduling conditions | ×1 | (C) |
| │───│─├─DTM Date/time/period | ×2 | (C) |
| │───│─└─Segment Group 28 | ×10 | (C) |
| │───│───├─RFF Reference | ×1 | (M) |
| │───│───└─DTM Date/time/period | ×1 | (C) |
| │───├─Segment Group 29 | ×10 | (C) |
| │───│─├─QVA Quantity variances | ×1 | (M) |
| │───│─├─DTM Date/time/period | ×5 | (C) |
| │───│─└─Segment Group 30 | ×10 | (C) |
| │───│───├─RFF Reference | ×1 | (M) |
| │───│───└─DTM Date/time/period | ×1 | (C) |
| │───└─Segment Group 31 | ×10 | (C) |
| │─────├─TDT Details of transport | ×1 | (M) |
| │─────└─DTM Date/time/period | ×5 | (C) |
| ├─UNS Section control | ×1 | (M) |
| ├─CNT Control total | ×5 | (C) |
| ├─FTX Free text | ×5 | (C) |
| └─UNT Message trailer | ×1 | (M) |
4.3. Data Segment Index (Alphabetic Sequence)
|
ALI |
Additional information |
|
BGM |
Beginning of message |
|
CNT |
Control total |
|
COM |
Communication contact |
|
CTA |
Contact information |
|
DOC |
Document/message details |
|
DTM |
Date/time/period |
|
FTX |
Free text |
|
GIN |
Goods identity number |
|
GIR |
Related identification numbers |
|
IMD |
Item description |
|
LIN |
Line item |
|
LOC |
Place/location identification |
|
MEA |
Measurements |
|
NAD |
Name and address |
|
PAC |
Package |
|
PCI |
Package identification |
|
PIA |
Additional product id |
|
QTY |
Quantity |
|
QVA |
Quantity variances |
|
RFF |
Reference |
|
SCC |
Scheduling conditions |
|
TDT |
Details of transport |
|
UNH |
Message header |
|
UNS |
Section control |
|
UNT |
Message trailer |
Return to EDIFACT D93A Messages page.
|