0. INTRODUCTION
1. SCOPE
   1. Functional definition
   2. Field of application
   3. Principles
2. REFERENCES
3. TERMS AND DEFINITIONS
   1. Standard terms and definitions
4. MESSAGE DEFINITION
   1. Segment clarification
      1. Header section
      2. Detail section
   2. Segment index (alphabetical sequence by tag)
   3. Message structure
      1. Segment table

This specification provides the definition of the Party information message (PARTIN) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport.

A message to enable the transmission of basic information regarding locations and the related operational, administrative, financial, manufacturing, confirmation of registration and trading data.

The Party information message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry.

The accurate and unambiguous identification of the trading partners and their operational parameters is an essential issue for EDI.

The Party Information Message serves to maintain the partners master data files.

Note: Once the data available in master data files is established:

• identifying codes should be used instead of clear data
• clear data is to be used if it is required to override the data from a particular transaction.

The Party Information Message is used to specify information related to physical locations and to functional locations. A functional location is usually a specific department within a company.

The change, delete, add indicator being given in the BGM segment, one separate message has to be provided per type of function required.

See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1.

See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2.

This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements.

The following guidelines and principles apply to the whole message and are intended to facilitate the understanding and implementation of the message:

All specified dates/times should be in the format 'ccyymmdd'/'hhmm' unless all parties involved in the transaction agree that there is a functional requirement for an alternative format. Periods should be specified as whole numbers representing the required period as indicated in the format qualifier (weeks, months, etc.)

Where a choice of code or text is given only the code element should be used wherever possible. Conditional data that is not required in the message should not be included.

Care must be taken that the segment qualifier in dependent segments do not conflict with the segment qualifier of the trigger segment of a group.

Free text information within the message should be avoided as this inhibits automatic processing.

Information to be provided in the Header section:

0010 UNH, Message header

A service segment starting and uniquely identifying a message. The message type code for the Party information message is PARTIN.

Note: Party information messages conforming to this document must contain the following data in segment UNH, composite S009:

0020 BGM, Beginning of message

A segment for unique identification of the Document name and number. The message function code (DE 1225) applies to all transactions indicated in the message. Consequently, one separate message has to be provided per type of function required. The following rules apply: - Addition (DE 1225 = 2). This code is used for providing information about parties for the first time to the trading partner. - Deletion (DE 1225 = 3). This code is used to delete parties from the partner's master file; In case of deletion, only the NAD segments need to be sent in the detail section. - Change (DE 1225 = 4). This code is used to modify any information relevant to parties already known by the trading partner. All the segments relating to the party including the address to be modified need to be sent. - Confirmation (DE 1225 = 6). This code is used when party information is sent again for confirmation.

0030 DTM, Date/time/period

A segment specifying general dates, and when relevant, times related to the whole message.

0040 FII, Financial institution information

A segment identifying the financial institution (e.g. bank) and relevant account numbers valid for all the parties described in the detail section of the message.

0050 FTX, Free text

A segment with free text information, in coded or clear form, used when additional information is needed but cannot be accommodated within other segments. In computer to computer exchanges such text will normally require the receiver to process this segment manually.

0060 Segment Group 1: RFF-DTM

A group of segments indicating reference numbers and optionally date of the reference relating to the whole message.

0070 RFF, Reference

A segment for referencing documents relating to the whole message, e.g. previously sent PARTIN message number, Interchange Agreement contract.

0080 DTM, Date/time/period

A segment specifying the date of the reference number indicated in the RFF segment.

0090 Segment Group 2: NAD-SG3

A group of segments identifying Names, Addresses, Contacts and Communication numbers relevant to the sender and the receiver of the message.

0100 NAD, Name and address

A segment for identifying the Sender and Receiver name and address.

0110 Segment Group 3: CTA-COM

A group of segments giving details of the specific person or department within the party.

0120 CTA, Contact information

A segment giving additional contact information relating to the party specified in the NAD segment, e.g. contact person or department in a particular function.

0130 COM, Communication contact

A segment to identify communication numbers of departments or persons related to the contact information provided in CTA.

Information to be provided in the Detail section:

0140 UNS, Section control

A service segment placed at the start of the detail section to avoid segment collision.

0150 Segment Group 4: NAD-DTM-FII-IDE-FTX-TAX-HYN-SG5-SG6-SG7-SG8-

SG9-SG10-SG11-SG12-SG13 A group of segments for giving the details of a party.

0160 NAD, Name and address

A segment for identifying the party identification code and the corresponding function, name and address. The party identification code is mandatory, and the structured address form is preferred.

0170 DTM, Date/time/period

A segment specifying the date and the time details relevant to the party information identified in the NAD segment.

0180 FII, Financial institution information

A segment identifying the financial institution, (e.g. bank) and relevant account numbers for the party identified in the NAD segment.

0190 IDE, Identity

This segment is used to indicate an alternative identification of a party.

0200 FTX, Free text

This segment is used to provide free form or coded text information related to the current party, e.g. a description of the primary activities of a party.

0210 TAX, Duty/tax/fee details

This segment is used to specify duty/tax/fee information related to the current party, e.g. party is exempt from tax.

0220 HYN, Hierarchy information

This segment is used to identify hierarchical connections from a given party to a higher or lower level party.

0230 Segment Group 5: LOC-DTM

A group of segments for giving locations and dates relevant to party.

0240 LOC, Place/location identification

A segment specifying the locations relevant to the party identified in the NAD segment, e.g. internal building number on a site.

0250 DTM, Date/time/period

A segment specifying dates and times relevant to the LOC segment.

0260 Segment Group 6: RFF-DTM

A group of segments for giving references relevant to the party.

0270 RFF, Reference

A segment for referencing numbers related to the party such as Party Tax Identification Number.

0280 DTM, Date/time/period

A segment specifying the date of the reference number indicated in the RFF segment.

0290 Segment Group 7: CTA-COM

A group of segments giving contact details of the specific person or department within the party.

0300 CTA, Contact information

A segment giving additional contact information relating to the party specified in the NAD segment, e.g. contact person of department in a particular function.

0310 COM, Communication contact

A segment to identify communication numbers of departments or persons related to the contact information provided in CTA.

0320 Segment Group 8: SCC-DTM

A group of segment specifying schedules related to the party identified in the NAD segment.

0330 SCC, Scheduling conditions

A segment specifying the type and status of the schedule being given, and optionally defining a pattern to be established, e.g. firm or proposed schedule for a weekly pattern of delivery hours.

0340 DTM, Date/time/period

A segment indicating the date/time details relevant to the schedule details in the SCC segment. This segment may be used to indicate date/time ranges.

0350 Segment Group 9: TOD-LOC

A group of segments specifying the standard terms of delivery.

0360 TOD, Terms of delivery or transport

A segment indicating terms of delivery related to the referenced NAD segment.

0370 LOC, Place/location identification

A segment specifying location for the referenced terms of delivery.

0380 Segment Group 10: PAI-PYT-CUX-DTM-PCD-MOA

A group of segments relating to the standard payment instructions, payment terms, the reference and the payment currencies.

0390 PAI, Payment instructions

A segment giving information on payment instructions.

0400 PYT, Payment terms

A segment giving information on the payment terms basis.

0410 CUX, Currencies

A segment giving information on the currencies.

0420 DTM, Date/time/period

This segment is used to specify dates, and/or times, or periods related to general payment conditions.

0430 PCD, Percentage details

This segment is used to specify percentage information related to payment conditions.

0440 MOA, Monetary amount

This segment is used to specify a monetary amount related to payment conditions.

0450 Segment Group 11: RCS-MOA-QTY

A group of segments for relating monetary amounts and quantities to requirements and conditions.

0460 RCS, Requirements and conditions

A segment to specify a requirement or a condition.

0470 MOA, Monetary amount

A segment specifying monetary amounts such as annual revenue.

0480 QTY, Quantity

A segment specifying quantities, such as the number of employees.

0490 Segment Group 12: CCI-MOA-QTY-CAV-DTM-MEA

A group of segments for relating monetary amounts and quantities to characteristics and classes.

0500 CCI, Characteristic/class id

A segment to specify a characteristic or a class.

0510 MOA, Monetary amount

A segment specifying monetary amounts.

0520 QTY, Quantity

A segment specifying quantities.

0530 CAV, Characteristic value

A segment to further specify party characteristics which apply to the party in the messages.

0540 DTM, Date/time/period

A segment providing dates/times related to the characteristic identification.

0550 MEA, Measurements

A segment providing measurements related to the characteristic identification.

0560 Segment Group 13: PRC-DTM-SG14

A group of segments for relating processes, entities and documents.

0570 PRC, Process identification

A segment for identifying a process.

0580 DTM, Date/time/period

A segment to specify dates/time/periods related to the process or sub-process.

0590 Segment Group 14: LIN-NAD-SG15

A group of segments for relating a line number and entity to a document.

0600 LIN, Line item

A segment for specifying a line number.

0610 NAD, Name and address

A segment for citing an entity and a related address.

0620 Segment Group 15: DOC-DTM

A group of segments to relate a document and a date.

0630 DOC, Document/message details

A segment to cite a document.

0640 DTM, Date/time/period

A segment to relate a date, such as an effective date or a version date to a document.

0650 UNT, Message trailer

A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message.