Return to EDIFACT D01B Messages page.Container discharge/loading report message
0. INTRODUCTIONThis specification provides the definition of the Container discharge/loading report message (COARRI) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport. 1. SCOPE1.1. Functional definitionA message by which the container terminal reports that the containers specified have been discharged from a seagoing vessel (discharged as ordered, overlanded or shortlanded), or have been loaded into a seagoing vessel. This message is part of a total set of container-related messages. These messages serve to facilitate the intermodal handling of containers by streamlining the information exchange. The business scenario for the container messages is clarified in a separate document, called: 'Guide to the scenario of EDIFACT container messages'. 1.2. Field of applicationThe Container discharge/loading report message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry. 1.3. PrinciplesBusiness area: Loading and discharging of containers/equipment Sending functions include: Container terminal, Stevedore Receiving functions include: Ship's agent, Liner agent In the context of the 'Guide to the scenario of EDIFACT container messages' (as referred to at the start of section 1) the following guidelines, rules and functionality apply to this Container discharge/loading report message:
The ordering customer agent, coded is needed to supplement the unique identification only in the following situation: the agent acts on behalf of several ordering customers issuing the same range of reference numbers for each customer. E.g., the ship's agent acts on behalf of several shipping lines issuing for each shipping line the same range of numbers.
The transport sub-working group (D4) has developed recommendations for a harmonised implementation of this message through its subgroup ITIGG (International Transport Implementation Guidelines Group). Users implementing the message are strongly advised to apply these recommendations, which may be obtained from the D4 secretariat. 2. REFERENCESSee UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1. 3. TERMS AND DEFINITIONS3.1. Standard terms and definitionsSee UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2. 4. MESSAGE DEFINITION4.1. Segment clarificationThis section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements. 0010 UNH, Message headerA service segment starting and uniquely identifying a message. The message type code for the Container discharge/loading report message is COARRI. Note: Container discharge/loading report messages conforming to this document must contain the following data in segment UNH, composite S009:
0020 BGM, Beginning of messageA segment to indicate the beginning of a message and to transmit identifying number and the further specification of the message type (in data element 1001: Document name code), such as Loading report, Discharge report. 0030 DTM, Date/time/periodA segment to indicate a date and/or time applying to the whole message, such as date and time of document or message issue. 0040 FTX, Free textA segment to specify free form or processable supplementary information, such as: - change information 0050 Segment Group 1: RFF-DTMA group of segments to specify a reference relating to the whole message, and its date and/or time. 0060 RFF, ReferenceA segment to express a reference which applies to the entire message, such as: - container discharge/loading order reference - reference to previous message 0070 DTM, Date/time/periodA segment to indicate date and/or time related to the reference. 0080 Segment Group 2: TDT-DTM-RFF-SG3A group of segments to indicate the main carriage means of transport. 0090 TDT, Details of transportA segment identifying the voyage of the vessel relevant to the message (main transport). 0100 DTM, Date/time/periodA segment identifying a date and time related to the means of transport such as the estimated date and time of the arrival and departure of a vessel. 0110 RFF, ReferenceA segment identifying a relevant reference number, such as: - shipping - syndicate - marketing organization - conference code 0120 Segment Group 3: LOC-DTMA segment group to identify locations related to the means of transport. 0130 LOC, Place/location identificationA segment to specify a location related to the means of transport such as places and ports of arrival and departure. 0140 DTM, Date/time/periodA segment to specify the date(s) and time(s) related to a location. 0150 Segment Group 4: NAD-SG5A group of segments to identify a party and related contacts. 0160 NAD, Name and addressA segment to identify the party's name, address, and function, and other addresses, such as: - message recipient - message sender - ordering customer - ordering customer agent 0170 Segment Group 5: CTA-COMA group of segments to identify a contact and its communications related to the party. 0180 CTA, Contact informationA segment to identify a person or department of a message sender and/or message recipient, such as: - information contact 0190 COM, Communication contactA segment to identify a communication number of a person or department to whom communication should be directed. 0200 Segment Group 6: EQD-RFF-GDS-TMD-DTM-SG7-MEA-DIM-SG8-SEL-FTX-PCD-SG9-EQA-PIA-COD-HAN-SG11-SG12-NAD A group of segments to specify containers either loaded or discharged; in the latter case - only in case of shortlanded - the group of segments is to specify containers that had to be discharged (according to the discharge order message). In a normal discharge report and load report message the container details are only required if they differ from the details given in the respective order message. In case of overlanded containers this group will contain the full container details giving as much information as possible. In case of shortlanded containers this group will only contain the container prefix and number. 0210 EQD, Equipment detailsA segment identifying a container, container size/type. The equipment status may be e.g. overlanded, shortlanded, import, export. 0220 RFF, ReferenceA segment identifying a relevant reference number, such as: - container sequence number - booking reference number 0230 GDS, Nature of cargoA segment to show the broad classification of the goods within a container for operational and general information purposes. 0240 TMD, Transport movement detailsA segment to indicate a Full Container Load (FCL) or a Less than Full Container Load (LCL). 0250 DTM, Date/time/periodA segment to identify a date and time related to the equipment, such as: - Date and/or time of actual loading or discharge - CSC expiration date (International Convention for Safe Containers) 0260 Segment Group 7: LOC-DTMA group of segments to identify a location or country related to the equipment. 0270 LOC, Place/location identificationA segment to identify a location or country related to the equipment, such as: - stowage cell - (final) place/port of discharge - transhipment place - place of delivery - country of origin/destination 0280 DTM, Date/time/periodA segment to specify date(s) and time(s) related to a location. 0290 MEA, MeasurementsA segment specifying a physical measurement related to the equipment, such as: - gross weight 0300 DIM, DimensionsA segment specifying physical dimensions related to the equipment, such as: - gross dimensions - off standard dimension general - off standard dimension left - off standard dimension right - off standard dimension back - off standard dimension front 0310 Segment Group 8: TMP-RNGA segment group to identify transport related temperature settings. 0320 TMP, TemperatureA segment which identifies the transport temperature setting of the container. 0330 RNG, Range detailsA segment to specify the transport temperature range setting of the container. 0340 SEL, Seal numberA segment identifying a seal number related to the equipment. 0350 FTX, Free textA segment to specify supplementary information related to the equipment, such as: - blockade reason - government inspection service - container loading remarks - container remarks - container order information - additional remarks concerning the container - container safety convention plate - continuous examination program (ACEP) 0360 PCD, Percentage detailsA segment to specify percentages related to the equipment such as percentage humidity. 0370 Segment Group 9: DGS-FTX-MEA-SG10A group of segments to specify dangerous goods details. 0380 DGS, Dangerous goodsA segment to identify the UN-number and the class of the dangerous goods loaded in the container. 0390 FTX, Free textA segment to give additional information regarding dangerous goods. 0400 MEA, MeasurementsA segment to specify measurements of the dangerous goods, such as: - net net weight. 0410 Segment Group 10: CTA-COMA group of segments to specify contact information. 0420 CTA, Contact informationA segment to identify a person or department to be contacted regarding dangerous goods. 0430 COM, Communication contactA segment to specify communication details of the dangerous goods contact. 0440 EQA, Attached equipmentA segment to identify clip-on units, such as: - generator sets 0450 PIA, Additional product idA segment to specify a commodity code relating to goods in the container. 0460 COD, Component detailsA segment to specify the details of the components of transport equipment. 0470 HAN, Handling instructionsA segment to specify handling instructions related to the equipment. 0480 Segment Group 11: DAM-CODA group of segments to specify damage details related to the equipment. 0490 DAM, DamageA segment to specify equipment damages, such as the point of the damage on the equipment, and the type of damage. 0500 COD, Component detailsA segment to specify component details of the damaged equipment. 0510 Segment Group 12: TDT-LOC-DTMA group of segments to specify the planned on-carriage details in case this message is a discharge report message. 0520 TDT, Details of transportA segment to identify the on-carriage transport details of the mode, means of transport by which the container will depart after being discharged. 0530 LOC, Place/location identificationA segment identifying a location related to the transport details, such as: - place of departure 0540 DTM, Date/time/periodA segment to specify a date/time relating to the on-carriage transport, such as arrival or departure date/time. 0550 NAD, Name and addressA segment to specify a related address or party, such as: - container operator 0560 CNT, Control totalA segment to specify the number of containers in the message, explicitly given by the sender. 0570 UNT, Message trailerA service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message. 4.2. Segment index (alphabetical sequence by tag)
4.3. Message structure4.3.1. Segment table
Return to EDIFACT D01B Messages page. |