Berth management message
| Version: | D |
|---|---|
| Release: | 01B |
| Contr. Agency: | UN |
| Revision: | 2 |
| Date: | 2001-05-15 |
| SOURCE: | D4 Transport (SWG) |
|
For general information on UN standard message types see UN Trade Data Interchange Directory, UNTDID, Part 4, Section 2.3, UN/ECE UNSM General Introduction |
|
This message also occurs in the following versions of this standard: D00A, D00B, D01A, D01B, D01C, D02A, D02B, D03A, D03B, D04A, D04B |
0. INTRODUCTION
This specification provides the definition of the Berth management message (BERMAN) to be used in Electronic Data Interchange (EDI) between trading partners involved in administration, commerce and transport.
1. SCOPE
1.1. Functional definition
The Berth management message is a message from a carrier, its agent or means of transport to the authority responsible for port and waterway management, requesting a berth, giving details of the call, vessel, berth requirements and expected operations.
1.2. Field of application
The Berth management message may be used for both national and international applications. It is based on universal practice related to administration, commerce and transport, and is not dependent on the type of business or industry.
1.3. Principles
This message is meant to comply with requirements of authorities concerning the request for berthing services. The following guidelines, rules and functionality apply to this Berth management message:
1- A message will contain information on only one means of transport/conveyance. The only exception will be the case of covering pre-announcement function.
2- A ship call may require several berths.
3- One berth may be the scenario of several operations.
4- The message has to cater for the provision of sending updates (cancellation, replace, provisional, definitive) or new services request such as shifts and request for second berth. The message will cover the function of pre-announcement of vessels.
The Transport SWG Working Group (D4) has developed recommendations for a harmonised implementation of this message through its subgroup ITIGG (International Transport Implementation Guidelines Group). Users implementing the message are strongly advised to apply these recommendations, which may be obtained from the D4 secretariat.
2. REFERENCES
See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 1.
3. TERMS AND DEFINITIONS
3.1. Standard terms and definitions
See UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM - General Introduction, Section 2.
4. MESSAGE DEFINITION
4.1. Segment clarification
This section should be read in conjunction with the segment table which indicates mandatory, conditional and repeating requirements.
0010 UNH, Message header
A service segment starting and uniquely identifying a message. The message type code for the Berth management message is BERMAN.
Note: Berth management messages conforming to this document must contain the following data in segment UNH, composite S009:
| Data element | 0065 | BERMAN |
| 0052 | D | |
| 0054 | 01B | |
| 0051 | UN |
0020 BGM, Beginning of message
A segment to indicate the beginning of the message by identifying the message by a message number.
0030 DTM, Date/time/period
A segment to identify a date and time on which the message is prepared.
0040 FTX, Free text
A segment to give free form or coded text information at message level
0050 RFF, Reference
A segment to provide a reference relating to the whole message, such as: - reference to previous message.
0060 Segment Group 1: NAD-SG2
A group of segments to identify a party related to the message.
0070 NAD, Name and address
A segment to identify the name and address of the ship's agent. The function to be qualified: - ship agent
0080 Segment Group 2: CTA-COM
A group of segments to identify a contact and its communications related to the party.
0090 CTA, Contact information
A segment to identify a person or a department within the party.
0100 COM, Communication contact
A segment to identify a communication number of the contact to whom communication should be directed.
0110 Segment Group 3: TDT-RFF-DTM-MEA-FTX-SG4-SG5
A group of segments to specify details for the arriving means of transport.
0120 TDT, Details of transport
A segment to identify the transport details of the arriving vessel.
0130 RFF, Reference
A segment to identify a relevant reference number, such as: - Lloyds number - shipping line reference - conference - internal customer code
0140 DTM, Date/time/period
A segment to identify a date and time related to the arrival of the means of transport, such as: - estimated time of arrival - estimated time of departure
0150 MEA, Measurements
A segment to specify physical dimensions of the vessel such as: - breadth - total length - draught - dead-weight
0160 FTX, Free text
A segment to provide supplementary information related to the means of transport, such as: - segregated ballast tanks - double bottom
0170 Segment Group 4: LOC-DTM
A group of segments to specify details of the ship's route
0180 LOC, Place/location identification
A segment to identify locations related to the transport details, such as: - previous port of call - next port of call - port of origin - port of destination
0190 DTM, Date/time/period
A segment to identify a date and time related to the ports of call in the ship's route
0200 Segment Group 5: GOR-RFF-NAD
A group of segments to provide customs information
0210 GOR, Governmental requirements
A segment to indicate the requirement for a specific governmental action and/or procedure. Codes indicating the movement of goods (import, export, transit) and other customs requirements regarding the ship calls will be applied
0220 RFF, Reference
A segment to identify a relevant reference codes, such as - customs codes for vessel routes - customs codes for special transit procedures
0230 NAD, Name and address
A segment to identify the name and address of a party relevant to the message, such as: - cargo brokers, consortia members sharing the vessel
0240 Segment Group 6: TSR-QTY-FTX-SG7
A group of segments to specify details for the transport service requirements
0250 | TSR, Transport service requirements
A segment to specify berthing, pilot and tugboat service details of the arriving vessel, such as: - arrival and berth, - change of berth, - change of side, - request for pilots service, - request for tugboat service, - request for mooring service
0260 + QTY, Quantity
A segment to indicate number of ports of call by the same captain on board in the same vessel
0270 + FTX, Free text
A segment to provide supplementary information related to the berthing, pilot, tugboat and mooring service details, such as: - payment terms, - remarks required by government sector
0280 Segment Group 7: LOC-MEA-DTM-QTY-POC-FTX-SG8
A group of segments to specify details of the service required.
0290 LOC, Place/location identification
A segment to identify locations related to the berth details, such as: - preferred berth - preferred side for berthing - preferred mooring site - goods position - pilot embarkation point
0300 MEA, Measurements
A segment to specify current physical dimensions of the vessel when entering the port, such as: - actual draught
0310 | DTM, Date/time/period
A segment to identify a date and time related to the arrival of the means of transport at the berth and mooring site specified, such as: - estimated/actual date and time for berthing, - estimated departure, - estimated arrival time to the pilot station, - estimated time for tugboat service start
0320 + QTY, Quantity
A segment to indicate number of pilots or tugboats required.
0330 POC, Purpose of conveyance call
A segment to specify the purpose of conveyance call, such as: - cargo operation - repair
0340 FTX, Free text
A segment to provide supplementary information related to the berth details, such as: - waste disposal facilities - supplies requested (water, power, fuel)
0350 Segment Group 8: HAN-NAD-SG9
A group of segments to specify details for the operations to be carried out.
0360 HAN, Handling instructions
A segment to identify the type of handling movement, such as: - loading - unloading
0370 NAD, Name and address
A segment to identify a name and address of a party, such as: - stevedoring company
0380 Segment Group 9: GDS-FTX-MEA-EQN-DGS
A group of segments to specify details of the cargo to be handled.
0390 GDS, Nature of cargo
A segment to identify the type of cargo, such as: - containers - dry bulk - liquid bulk - others
0400 FTX, Free text
A segment to provide detailed information related to the type of cargo
0410 MEA, Measurements
A segment to specify cargo weight
0420 EQN, Number of units
A segment to identify number of units, such as: - containers - cars
0430 DGS, Dangerous goods
A segment to identify dangerous goods
0440 UNT, Message trailer
A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message.
4.2. Segment index (alphabetical sequence by tag)
| BGM | Beginning of message | |
| COM | Communication contact | |
| CTA | Contact information | |
| DGS | Dangerous goods | |
| DTM | Date/time/period | |
| EQN | Number of units | |
| FTX | Free text | |
| GDS | Nature of cargo | |
| GOR | Governmental requirements | |
| HAN | Handling instructions | |
| LOC | Place/location identification | |
| MEA | Measurements | |
| NAD | Name and address | |
| POC | Purpose of conveyance call | |
 |
QTY | Quantity |
| RFF | Reference | |
| TDT | Details of transport | |
| TSR | Transport service requirements | |
| UNH | Message header | |
| UNT | Message trailer |
4.3. Message structure
4.3.1. Segment table
| ├─UNH Message header | ×1 | (M) |
| ├─BGM Beginning of message | ×1 | (M) |
| ├─DTM Date/time/period | ×9 | (C) |
| ├─FTX Free text | ×9 | (C) |
| ├─RFF Reference | ×9 | (C) |
| ├─Segment Group 1 | ×9 | (M) |
| │─├─NAD Name and address | ×1 | (M) |
| │─└─Segment Group 2 | ×9 | (C) |
| │───├─CTA Contact information | ×1 | (M) |
| │───└─COM Communication contact | ×9 | (C) |
| ├─Segment Group 3 | ×99 | (M) |
| │─├─TDT Details of transport | ×1 | (M) |
| │─├─RFF Reference | ×9 | (C) |
| │─├─DTM Date/time/period | ×9 | (C) |
| │─├─MEA Measurements | ×99 | (C) |
| │─├─FTX Free text | ×9 | (C) |
| │─├─Segment Group 4 | ×999 | (C) |
| │─│─├─LOC Place/location identification | ×1 | (M) |
| │─│─└─DTM Date/time/period | ×9 | (C) |
| │─└─Segment Group 5 | ×9 | (C) |
| │───├─GOR Governmental requirements | ×1 | (M) |
| │───├─RFF Reference | ×9 | (C) |
| │───└─NAD Name and address | ×99 | (C) |
| ├─Segment Group 6 | ×9 | (C) |
| │─├─TSR Transport service requirements | ×1 | (M) |
| │─├─QTY Quantity | ×9 | (C) |
| │─├─FTX Free text | ×9 | (C) |
| │─└─Segment Group 7 | ×9 | (C) |
| │───├─LOC Place/location identification | ×1 | (M) |
| │───├─MEA Measurements | ×9 | (C) |
| │───├─DTM Date/time/period | ×9 | (C) |
| │───├─QTY Quantity | ×9 | (C) |
| │───├─POC Purpose of conveyance call | ×9 | (C) |
| │───├─FTX Free text | ×9 | (C) |
| │───└─Segment Group 8 | ×9 | (C) |
| │─────├─HAN Handling instructions | ×1 | (M) |
| │─────├─NAD Name and address | ×9 | (C) |
| │─────└─Segment Group 9 | ×9 | (C) |
| │───────├─GDS Nature of cargo | ×1 | (M) |
| │───────├─FTX Free text | ×9 | (C) |
| │───────├─MEA Measurements | ×9 | (C) |
| │───────├─EQN Number of units | ×9 | (C) |
| │───────└─DGS Dangerous goods | ×9 | (C) |
| └─UNT Message trailer | ×1 | (M) |
Return to EDIFACT D01B Messages page.